Closure of User to User Forums
Moderator: Ken Berry
-
john4647
- Posts: 196
- Joined: Mon May 21, 2012 5:44 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: Intel i7 6700 340ghz
- ram: 16GB
- Video Card: NVIDIA GeForce GT 720
- sound_card: NVIDIA
- Hard_Drive_Capacity: 1TB SSD +
- Monitor/Display Make & Model: Dell 24"
- Corel programs: VS 2021 ULT, PSP 2023 ULT, VS2023 ULT, +
- Location: UK
Re: Closure of User to User Forums
Very sad.
I have used this forum for a number of years and a number of problems.
Trevor, Ken and many others have always solved my queries. Many thanks to you all.
Perhaps time to move camp?
I have used this forum for a number of years and a number of problems.
Trevor, Ken and many others have always solved my queries. Many thanks to you all.
Perhaps time to move camp?
- lata
- Site Admin
- Posts: 14280
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
- Contact:
Re: Closure of User to User Forums
Try this link for clean up toolsBiAnMiXiang wrote: ↑Wed Jan 31, 2024 3:44 am There're many useful stuffs on this forum, such as clean-up tools & hotfixes.
I hope they can be offered on another place, such as kb.corel.com...
https://kb.corel.com/en/128827
- zaphodikus
- Posts: 288
- Joined: Wed Jul 09, 2014 9:23 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ROG-X570-F-Asus
- processor: AMD 3950 - 16 core
- ram: 64Gb
- Video Card: AMD RX 6700
- Hard_Drive_Capacity: M2 1TB
- Monitor/Display Make & Model: 4K BenQ
- Corel programs: VS 2023 Ultimate, Painter 2020
- Location: United Kingdom, Cambridge
- Contact:
Re: Closure of User to User Forums
Thank you all, have learned a lot and hope to make the transition to another tool over time.
It has been a good journey to have started using this tool as it has been a good place to start from.
It has been a good journey to have started using this tool as it has been a good place to start from.
- BiAnMiXiang
- Posts: 31
- Joined: Thu Feb 07, 2019 7:09 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS TUF Gaming FA506IV
- processor: AMD Ryzen 7 4800H with Radeon Graphics
- ram: 16 GB DDR4
- Video Card: NVIDIA GeForce RTX 2060
- sound_card: Realtek HD Audio ALC 256
- Hard_Drive_Capacity: 1 TB SSD + 2 TB HDD
- Monitor/Display Make & Model: Built-In 1080p Display
- Corel programs: Corel VideoStudio 2021, 2022, 2023
- Location: China Mainland
- Contact:
Re: Closure of User to User Forums
In this page, the download link is still linked to this forum. (forum.corel.com)lata wrote: ↑Wed Jan 31, 2024 6:23 pmTry this link for clean up toolsBiAnMiXiang wrote: ↑Wed Jan 31, 2024 3:44 am There're many useful stuffs on this forum, such as clean-up tools & hotfixes.
I hope they can be offered on another place, such as kb.corel.com...
https://kb.corel.com/en/128827
Build dreams with love and curiosity
- HanawaMica
- Posts: 14
- Joined: Sat Jan 28, 2023 4:19 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASRock H610M-HDV[slash]M[dot]2
- processor: Intel Core i3-12100
- ram: 32 GB DDR4
- Video Card: Intel HD Graphics 530 + NVIDIA 40HX
- sound_card: Realtek ALC897
- Hard_Drive_Capacity: 512 GB SSD + 2 TB HDD
- Monitor/Display Make & Model: AOC 2346
- Corel programs: Corel VideoStudio 2021 - 2023
- Location: China Mainland
Re: Closure of User to User Forums
Sadly, I think not all pages of this forum will be saved.Martin H wrote: ↑Wed Jan 31, 2024 1:10 pmDoes the wayback machine automatically save copies of forum pages like these? I've just taken a quick peep for certain topics and many are not yet archived because they are still available on the web.
Many thanks to Trevor, Ken, RobertOZ and others who helped with my historical issues with Newblue conflicts with this software.
But everyone can go to the wayback machine, save and archive pages now before the forum is closed.
Hope, love, and everything grows
- RobertOZ
- Advisor
- Posts: 2426
- Joined: Tue Jun 26, 2012 12:50 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Asus Prime B550M-A WI-FI AM4 mATX
- processor: AMD Ryzen 5 3600 3 6 GHz
- ram: 16GB
- Video Card: Asus Geforce GTX 1650 GDDR6 Driver 551 23
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 7 TB
- Monitor/Display Make & Model: Philips 32" IPS LED, Samsung 28" 3840x2160 UHD 4K
- Corel programs: VS2018/21/22/23 & MS 3D, MCC XL
- Location: Mornington, Vic. Australia
Re: Closure of User to User Forums
The Humble Bundle now have the Corel software package available for the next 21 days, Painter 2023, Paintshop Pro 2023 & Video Studio Pro 2023 for AU$50.73, however no mention that support could be non existent, who do Alludo have left who will be able to answer "How To" questions, they seem to have retrenched the existing Corel staff
-
TonyP
- Posts: 985
- Joined: Mon Mar 12, 2012 11:38 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabtye X570 Elite
- processor: AMD Ryzen 9 5950X 16core 32threads
- ram: 32GB 3200
- Video Card: Sapphire RX 6700XT 12GB
- sound_card: Realtek
- Hard_Drive_Capacity: 10TB
- Monitor/Display Make & Model: LG 27" IPS 4k, Acer 24" 1920x1080
- Corel programs: VS2023, PSP2023, Aftershot 3
- Location: Lublin, Poland
Re: Closure of User to User Forums
It's the basic version of VS, PSP, and AS3. It's $25USD. If one needs Aftershot, which hasn't been updated in a long time, or Painter, then for the price, I guess it's alright
LINK
LINK
-
Ken
- Posts: 75
- Joined: Thu Apr 09, 2020 6:27 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: NotSure
- processor: Intel
- ram: 16G
- Hard_Drive_Capacity: 1TB
Re: Closure of User to User Forums
I admit this is rather shocking news. I have used Corel's Tech Support in the past and i can say: They Suck! Any help I've received has been via this forum. I did receive a Patch a few days ago. I assume the patch is intended to fix the "Out of Memory" error.
So, thank you, Mr. Berry, Lata, and many others for all their help and support.
I will now begin investigating Vegas Pro 21, as one of the contributors has suggested. Thanks All!!
So, thank you, Mr. Berry, Lata, and many others for all their help and support.
I will now begin investigating Vegas Pro 21, as one of the contributors has suggested. Thanks All!!
- lata
- Site Admin
- Posts: 14280
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
- Contact:
Re: Closure of User to User Forums
Can you say if the out of memory has been fixed?Ken wrote: ↑Sat Feb 03, 2024 6:18 pm I admit this is rather shocking news. I have used Corel's Tech Support in the past and i can say: They Suck! Any help I've received has been via this forum. I did receive a Patch a few days ago. I assume the patch is intended to fix the "Out of Memory" error.
So, thank you, Mr. Berry, Lata, and many others for all their help and support.
I will now begin investigating Vegas Pro 21, as one of the contributors has suggested. Thanks All!!
.
Would you like to post here, not that it will make any difference
https://forum.corel.com/viewtopic.php?p=402435#p402435
-
Ken
- Posts: 75
- Joined: Thu Apr 09, 2020 6:27 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: NotSure
- processor: Intel
- ram: 16G
- Hard_Drive_Capacity: 1TB
Re: Closure of User to User Forums
Actually i have not done any project large enough to tell. I hope to get into something soon that will tell me if the error has been corrected and ill post the results on this forum -- if the forum is still up.
-
pepegota
- Posts: 1004
- Joined: Thu Jun 11, 2009 5:49 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS TUF Z390-Plus
- processor: Intel i9 - 9900k
- ram: 64 GB
- Video Card: GTX 1660 6GB
- sound_card: On board sound
- Hard_Drive_Capacity: 2 TB
- Monitor/Display Make & Model: Ben Q, "21" LCD
- Corel programs: VS 2018, VS 2019, VS 2020
- Location: USA
Re: Closure of User to User Forums
This is a great loss. I will miss Ken Berry, Lata, and RobertOZ. I hope a VS forum continues as it was user friendly with excellent moderators.
Last edited by pepegota on Mon Feb 05, 2024 4:56 pm, edited 1 time in total.
-
asik1
- Posts: 3446
- Joined: Thu Apr 17, 2014 6:07 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: H170M-E D3
- processor: i5-6600
- ram: 8gb
- Video Card: GTX1050-2GB
- Hard_Drive_Capacity: No hoarder
- Monitor/Display Make & Model: 2K HP-27MQ
- Corel programs: VS-X9.2, 2020, 2023
- Location: Israel
Re: Closure of User to User Forums
Hi, I guess Aludo AI will take things over. I hope it scans the thouseds pages of the forum and will make sense of it all.
Yes, the competition is fierce and no NLE is perfect, only the one you learn it's culprits workarounds.
Yes, the competition is fierce and no NLE is perfect, only the one you learn it's culprits workarounds.
Panasonic X900m, VXF1
- Amir23
- Posts: 52
- Joined: Fri Sep 02, 2022 12:27 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte GA-770T-USB3
- processor: AMD Phenom II X4 925 2800 MHz 4 core[s]
- ram: 16 GB
- Video Card: NVIDIA GeForce GT 740 [2GB]
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 100 GB SSD + 200 GB HDD
- Monitor/Display Make & Model: Monitor LG
- Corel programs: VideoStudio 2023
Re: Closure of User to User Forums
It was shocking and sad news.
If you want my opinion, I will tell you not to be optimistic about the future of VS.
Of course, this is just my personal opinion.
They had a year from February 2023 until now to plan and release version 27, But they only provided an update from last year's version.
At least, I wish they would release the program's bug fixes along with a small amount of new features in version 27.
I feel that Alludo may cause VS to regress in the future.
VS had a lot of crashes and I welcome the fixing of these crashes, but VS needs to be upgraded, it still has many shortcomings and needs new features.
I am losing my hope for VS little by little.
CyberLink PowerDirector is a good alternative that is on par with VS.
Sorry to say this ladies, but it proved to me that management should never be left in the hands of a woman.
I hope Alludo doesn't take away this Ulead souvenir from us with wrong policies and destroy Corel's legacy.
If you want my opinion, I will tell you not to be optimistic about the future of VS.
Of course, this is just my personal opinion.
They had a year from February 2023 until now to plan and release version 27, But they only provided an update from last year's version.
At least, I wish they would release the program's bug fixes along with a small amount of new features in version 27.
I feel that Alludo may cause VS to regress in the future.
VS had a lot of crashes and I welcome the fixing of these crashes, but VS needs to be upgraded, it still has many shortcomings and needs new features.
I am losing my hope for VS little by little.
CyberLink PowerDirector is a good alternative that is on par with VS.
Sorry to say this ladies, but it proved to me that management should never be left in the hands of a woman.
I hope Alludo doesn't take away this Ulead souvenir from us with wrong policies and destroy Corel's legacy.
-
RickMen
- Posts: 258
- Joined: Mon Mar 30, 2009 6:03 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B660M GAMING AC DDR4
- processor: Intel i7-12700F
- ram: 16GB
- Video Card: NVIDIA GeForce GT 730
- sound_card: Realtek HD Audio
- Hard_Drive_Capacity: 500GB M2 PCIe NVMe SDD
- Monitor/Display Make & Model: Philips 246V5 24inch wide LCD
- Corel programs: VS2022 Ultimate, VS2018 Ultimate
- Location: Sydney, Australia
Re: Closure of User to User Forums
What a shame. I've found this forum to be a lifesaver and a wonderful educational source of info/tips. It doesn't look good for the future of VS. It seems like this new mob are pushing us off VS. I have never had a good experience with their support desk.
Sony FDR-AX53, JVC Everio GZ-HD40
- Ken Berry
- Site Admin
- Posts: 22481
- Joined: Fri Dec 10, 2004 9:36 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B550M DS3H AC
- processor: AMD Ryzen 9 5900X
- ram: 32 GB DDR4
- Video Card: AMD RX 6600 XT
- Hard_Drive_Capacity: 1 TB SSD + 2 TB HDD
- Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
- Corel programs: VS2022; PSP2023; DRAW2021; Painter 2022
- Location: Levin, New Zealand
Re: Closure of User to User Forums
Have a look at the new forum for VS and PSP which Trevor (lata), Kathy_9 and I have set up at https://psp-vs-forums.freeforums.net/ Have a look at it and think about registering there. You will get all the same service there that you have received here, and with much the same people as just about all of our current Advisers have already signed up there.
Ken Berry
