MultiCam Capture Lite
Moderator: Ken Berry
-
Radim
- Posts: 712
- Joined: Mon Nov 01, 2010 5:54 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- ram: 4GB
- Monitor/Display Make & Model: 27 inch
MultiCam Capture Lite
MultiCam Capture Lite ..does it exist full version also?
-
Ken Berry
- Site Admin
- Posts: 22481
- Joined: Fri Dec 10, 2004 9:36 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B550M DS3H AC
- processor: AMD Ryzen 9 5900X
- ram: 32 GB DDR4
- Video Card: AMD RX 6600 XT
- Hard_Drive_Capacity: 1 TB SSD + 2 TB HDD
- Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
- Corel programs: VS2022; PSP2023; DRAW2021; Painter 2022
- Location: Levin, New Zealand
Re: MultiCam Capture Lite
It does, though it used to cost $49... It was released early in 2018. However, I am not sure where or how you go about buying and downloading it since I can't find it listed among current Corel products.
EDIT: after a bit of digging around, I found it -- a little ironically -- in the Pinnacle Studio lineup: https://www.pinnaclesys.com/en/products ... m-capture/ It does indeed cost $49.95, though that apparently is Canadian dollars. And you have to have Pinnacle to be able to upgrade to the full version, through Pinnacle's Get More menu...
However, I have just cross-checked that with Video Studio 2019's Get More, and it is there too. What's more, there is currently a Sale price of $14.95 on it. In this case it's in New Zealand dollars, so I imagine it would be available for around US$10... (And in fact, I have now bought it! Mind you, I can't really see much difference from the Lite version, and it only films in MJPEG... I thought it would give me more variety than that! I think the only extra you get is additional camera angle support...)
EDIT: after a bit of digging around, I found it -- a little ironically -- in the Pinnacle Studio lineup: https://www.pinnaclesys.com/en/products ... m-capture/ It does indeed cost $49.95, though that apparently is Canadian dollars. And you have to have Pinnacle to be able to upgrade to the full version, through Pinnacle's Get More menu...
However, I have just cross-checked that with Video Studio 2019's Get More, and it is there too. What's more, there is currently a Sale price of $14.95 on it. In this case it's in New Zealand dollars, so I imagine it would be available for around US$10... (And in fact, I have now bought it! Mind you, I can't really see much difference from the Lite version, and it only films in MJPEG... I thought it would give me more variety than that! I think the only extra you get is additional camera angle support...)
Ken Berry
-
lata
- Site Admin
- Posts: 14280
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
- Contact:
Re: MultiCam Capture Lite
In the UK it shows for £7.99
I was tempted just to compare the difference, but don’t use the Lite version that much anyway
Its only £7.99 but is better in my pocket
I was tempted just to compare the difference, but don’t use the Lite version that much anyway
Its only £7.99 but is better in my pocket