VS9.0 16:9 ratio problem

[hanskru]

I am a user since VS5.0, now I am using VS9.0. I have filmed with my Sharp VL-Z5s in 16:9 format. When I play this directly from my CAM to TV, than automatically the whole TV screen (16:9) is used.
After capturing my video ( project properties do show Attributes 24 bits, 720x576, 16:9, DV Video Encoder Type 1) and burning it on DVD thru the recommended procedure I see on my TV screen on top and bottom a thick black area. What goes wrong?

Also someone else was filming the same happening with 4:3, so I captured in 4:3
I want to use some of the scenes, but when I created a video file into 16:9 ratio, than I see on my PC screen in VS9.0 the video within a black square, whereas my film, original taped in 16:9 ratio, shows on my PC screen in VS9.0 on the top and bottom a large thick black area.
Has anyone a suggestion?

[hanskru]

I was able tyo find the solutions myself. I have filmed in 16:( format. WhenI capture in PAL DVD 4;3 mode than I just get the standard black bar and not double the size.
So my conclusion is: when filming in 16:( format, captuer in 4:3 format and in creating disc continue settings in 4:3 format. When shown on TV screen(16:9) the black bar disappears.
thanks

[hanskru]

I was able tyo find the solutions myself. I have filmed in 16:( format. WhenI capture in PAL DVD 4;3 mode than I just get the standard black bar and not double the size.
So my conclusion is: when filming in 16:( format, captuer in 4:3 format and in creating disc continue settings in 4:3 format. When shown on TV screen(16:9) the black bar disappears.
thanks