Include FastFlick project as part of project in Video Studio
Moderator: Ken Berry
-
Ken Veal
- Posts: 1679
- Joined: Wed Oct 12, 2005 7:21 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: msi mpg z390 gaming edge ac lga 1151 ddr4
- processor: 360 gigahertz Intel Core i9 900K
- ram: 32 GB
- Video Card: EVGA GeForceGTX 760 2GB GDDR5 PCI E 3 0
- Hard_Drive_Capacity: 1250GB SSD
- Monitor/Display Make & Model: Samsung U28E90 28” UHD 4k
- Corel programs: PaintSPro2021Ult.PhotoMirage.VS.2020 Ult
- Location: London,England
Include FastFlick project as part of project in Video Studio
VSX10 Project to be Burned to Mpeg 2 for DVD disc.I want to include a Fast Flick project as part of a VS project (more than once). Would it be best to create a Fast Flick video file and save it to the PC with an Mpeg2 profile or place files directly on the VS project timeline via clicking" edit in VS" in Fast Flick ?
-
lata
- Site Admin
- Posts: 14280
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
- Contact:
Re: Include FastFlick project as part of project in Video St
Personally I would Edit in Video Studio where I can complete my project, that of course could be the Fast Flick intro, I could then render to a video file or add the rest of my video clips.
-
Ken Veal
- Posts: 1679
- Joined: Wed Oct 12, 2005 7:21 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: msi mpg z390 gaming edge ac lga 1151 ddr4
- processor: 360 gigahertz Intel Core i9 900K
- ram: 32 GB
- Video Card: EVGA GeForceGTX 760 2GB GDDR5 PCI E 3 0
- Hard_Drive_Capacity: 1250GB SSD
- Monitor/Display Make & Model: Samsung U28E90 28” UHD 4k
- Corel programs: PaintSPro2021Ult.PhotoMirage.VS.2020 Ult
- Location: London,England
Fast Flick editing and saving
1 With my current VS project open and with the same named sub library open and the video track complete so far at the end of the files, I opened fast flick via tools-fast flick.
2 I selected a template and added some jpegs.
3 When the VS title appeared in FF, on trying to edit that, I could not delete the “V” in the box. Backspacing worked up until the last remaining V and I could not find a way to get rid of it, I ended up reducing the size of the box so that it could not be seen. What is the answer to this issue.
4 In the FF shave and share tab, I clicked “Edit in VS”. The files were placed on the front of a new timeline in an untitled new project but not at the end of the time line of my current and what was an open project. So I had to save the fast flick project to a separate folder and then import it into my current VS project .Is this the only way it can be done.
2 I selected a template and added some jpegs.
3 When the VS title appeared in FF, on trying to edit that, I could not delete the “V” in the box. Backspacing worked up until the last remaining V and I could not find a way to get rid of it, I ended up reducing the size of the box so that it could not be seen. What is the answer to this issue.
4 In the FF shave and share tab, I clicked “Edit in VS”. The files were placed on the front of a new timeline in an untitled new project but not at the end of the time line of my current and what was an open project. So I had to save the fast flick project to a separate folder and then import it into my current VS project .Is this the only way it can be done.