Problem looking at posts on i phone
Moderator: Ken Berry
-
Ken Veal
- Posts: 1679
- Joined: Wed Oct 12, 2005 7:21 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: msi mpg z390 gaming edge ac lga 1151 ddr4
- processor: 360 gigahertz Intel Core i9 900K
- ram: 32 GB
- Video Card: EVGA GeForceGTX 760 2GB GDDR5 PCI E 3 0
- Hard_Drive_Capacity: 1250GB SSD
- Monitor/Display Make & Model: Samsung U28E90 28” UHD 4k
- Corel programs: PaintSPro2021Ult.PhotoMirage.VS.2020 Ult
- Location: London,England
Problem looking at posts on i phone
I tried to look at the post I have just answered(on my desk top) on my iphone 7 and it told me that I had made too many attempts to log on and wanted my password and pass word which I entered, it then asked me what company ran the board so I entered Corel than it wanted me to register.What is going on here?
-
lata
- Site Admin
- Posts: 14280
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
- Contact:
Re: Problem looking at posts on i phone
Hi Kenneth
Well what you describe does not seem correct for a connection to the forum.
The forum certainly would not ask which company ran the forum.
Take care when accessing the internet there are bogus sites out there.
http://forum.corel.com/EN/
The above link will take you to the correct Corel forum, where you can browse and read the posts without being Logged In.
However if you try to reply to a post you will be prompted to Log-In
You can also Log In by selecting the words top right of the index page.
Well what you describe does not seem correct for a connection to the forum.
The forum certainly would not ask which company ran the forum.
Take care when accessing the internet there are bogus sites out there.
http://forum.corel.com/EN/
The above link will take you to the correct Corel forum, where you can browse and read the posts without being Logged In.
However if you try to reply to a post you will be prompted to Log-In
You can also Log In by selecting the words top right of the index page.