Device Error: Cannot open wave-in device

Moderator: Ken Berry

Post Reply
jchamilt
Posts: 2
Joined: Thu Jul 20, 2017 4:27 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Dell 8500
processor: Intel 7
ram: 8GB
Hard_Drive_Capacity: 1.8
Monitor/Display Make & Model: Sceptre 24 inch
Corel programs: VS UX10

Device Error: Cannot open wave-in device

Post by jchamilt »

I am using VS UX10 and have not had a problem with voice over. Just now I get the error "Device Error: Cannot open wave-in device." There was one post on this board for VS 7 and an older Windows version. What is a puzzle is I just used voice over 4 days ago and there was no problem. I just now went through the setup for voice recognition and the mic worked fine. I then followed the directions on the post for VS 7 with exactly the same problem. I went to device manager and uninstalled the mic and restarted my computer and let windows reinstall the device. Still get the same error message. Any suggestions? and what could cause this?
User avatar
lata
Site Admin
Posts: 14280
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
Location: UK
Contact:

Re: Device Error: Cannot open wave-in device

Post by lata »

Hi

Voice Over fails with Device Error: Cannot Open Wave-In Device

This fails every time when Project Properties are set to use “Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)”

Please set your Project Properties to use Stereo (2/0(L/R)

Let us know if that fixes your problem.
New forum for PSP and VS users, register if you need help

https://psp-vs-forums.freeforums.net
Post Reply