I'm trying to re-create this title animation. See how the cast names start and then move to the left or right. I can't find this animation. I've found fly but it has an exit, which I don't want. I just want the words to move left or right until the clip cuts without exiting. Please help, this is so frustrating.
https://www.youtube.com/watch?v=pCZezJxyaDc
How to add title animation "fly" but I don't want an exit.
Moderator: Ken Berry
-
lata
- Site Admin
- Posts: 14280
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
- Contact:
Re: How to add title animation "fly" but I don't want an exi
Hi
and welcome to the forums.
There is an option to choose the two "TT's" symbol next to the Animation, that will give you a manual approach to setting animation
But for this affect I think Customise Motion would do
Right click clip in timeline for Customise Motion.
and welcome to the forums.
There is an option to choose the two "TT's" symbol next to the Animation, that will give you a manual approach to setting animation
But for this affect I think Customise Motion would do
Right click clip in timeline for Customise Motion.
Re: How to add title animation "fly" but I don't want an exi
I tried doing customize and can't seem to understand it. I used the TT symbols and did fly but there is an exit and entrance which I don't want. I dragged the orange bars/dots to where I wanted it to start so the entrance was removed but the exit is still there. I decided to just extend the title 10 seconds although the clip is like 3 seconds that way the exit would be at the 8-10 second mark, where my clip isn't at but how would I go about cutting out the parts that aren't on the clip?lata wrote:Hi
and welcome to the forums.
There is an option to choose the two "TT's" symbol next to the Animation, that will give you a manual approach to setting animation
But for this affect I think Customise Motion would do
Right click clip in timeline for Customise Motion.
-
BrianCee
- Posts: 5487
- Joined: Sat Jan 21, 2012 1:04 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- ram: 8GB
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: HP
- Corel programs: VS X4,X5,X6,X7,X8, X9, X10, 2018 , 2019
- Location: London England UK
Re: How to add title animation "fly" but I don't want an exi
Customise motion is the way to do it - it is very easy once you get the hang of it.
Re: How to add title animation "fly" but I don't want an exi
Any video or tutorials on how to learn it? Also, what about the shadow in the video I provided where the person's name is shadowed. I found the affect but I don't know how to make it bigger/wider and not match the font size of the original.BrianCee wrote:Customise motion is the way to do it - it is very easy once you get the hang of it.
-
BrianCee
- Posts: 5487
- Joined: Sat Jan 21, 2012 1:04 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- ram: 8GB
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: HP
- Corel programs: VS X4,X5,X6,X7,X8, X9, X10, 2018 , 2019
- Location: London England UK
Re: How to add title animation "fly" but I don't want an exi
New topic started here - - http://forum.corel.com/EN/viewtopic.php?f=1&t=58282
this topic locked to prevent further confusion
this topic locked to prevent further confusion