VIDEO CLIP STOPS 1 SECOND FROM THE END
Moderator: Ken Berry
-
pagey
- Posts: 1
- Joined: Sat May 04, 2013 11:44 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Intel Core i7
- processor: i7-3770 processor 3.40 Ghz
- ram: 16GB
- Video Card: NVIDIA GeForce GT 640 1 GB GDDR5
- sound_card: NVIDIA GeForce GT 640 1 GB GDDR5
- Hard_Drive_Capacity: 2TB
- Monitor/Display Make & Model: DELL 24inch
VIDEO CLIP STOPS 1 SECOND FROM THE END
I have Corel Video Studio X5 Pro. When I am viewing the video clips in STORY BOARD VIEW the clip stops 1 second from the end. This happens to all video clips. It doesn't happen in time line view. I can manually move the scrubber through this last second and I can still edit. If I edit the last second out and play the clip it will still stop 1 second from the end. I'm guessing its a simple setting somewhere, but I can't find it and its very irritating! Any one ?????
-
BrianCee
- Posts: 5487
- Joined: Sat Jan 21, 2012 1:04 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- ram: 8GB
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: HP
- Corel programs: VS X4,X5,X6,X7,X8, X9, X10, 2018 , 2019
- Location: London England UK
Re: VIDEO CLIP STOPS 1 SECOND FROM THE END
This problem has been covered in great depth here
:-- http://forum.corel.com/EN/viewtopic.php?f=1&t=50273
please read that topic and continue this discussion if needed there.
I have put a copy of your post on the end of that topic and locked this one to prevent confusion having two topics discussing the same problem'
:-- http://forum.corel.com/EN/viewtopic.php?f=1&t=50273
please read that topic and continue this discussion if needed there.
I have put a copy of your post on the end of that topic and locked this one to prevent confusion having two topics discussing the same problem'