Creating a video file in BD format
Moderator: Ken Berry
-
wkutter
- Posts: 7
- Joined: Sun Mar 20, 2011 3:00 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Quanta 363C 32.16
- processor: 1.60 GHz Intel Core i7 Q 720
- ram: 6.1 GB
- Video Card: NIVIDIA GeForce GT 230 M
- Hard_Drive_Capacity: 500 GB
- Monitor/Display Make & Model: Generic PnP Monitor 17.1"
Creating a video file in BD format
I created a 4 minute video project in VS Pro X3. Source of video clips were from a Sony HDR-CX550V camcorder. I added some titles to a few video clips and 3 titles on a "Graphic - Color" background. When creating a video file (under SHARE) and choosing Blu-ray ----> NTSC MPEG2 (1920 x 1080), I found the following: Video clips are sharp, no problem, but the titles have black lines at irregular intervals, to the point that the letters cannot be read. What may be the cause and how can I eliminate this problem. Thank's.
-
Ron P.
- Advisor
- Posts: 12002
- Joined: Tue May 10, 2005 12:45 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
- Location: Kansas, USA
Re: Creating a video file in BD format
What text properties are you using? (Font, size, italic, bold) VS uses fonts installed on your system, as well as those that you can download from Corel. Some system fonts provided in Windows do not work well for video.
Ron Petersen, Web Board Administrator
-
wkutter
- Posts: 7
- Joined: Sun Mar 20, 2011 3:00 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Quanta 363C 32.16
- processor: 1.60 GHz Intel Core i7 Q 720
- ram: 6.1 GB
- Video Card: NIVIDIA GeForce GT 230 M
- Hard_Drive_Capacity: 500 GB
- Monitor/Display Make & Model: Generic PnP Monitor 17.1"
Re: Creating a video file in BD format
When creating the titles, I am using the fonts available in the Corel Pro X3 Program under "Titles".Ron P. wrote:What text properties are you using? (Font, size, italic, bold) VS uses fonts installed on your system, as well as those that you can download from Corel. Some system fonts provided in Windows do not work well for video.
-
Ken Berry
- Site Admin
- Posts: 22481
- Joined: Fri Dec 10, 2004 9:36 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B550M DS3H AC
- processor: AMD Ryzen 9 5900X
- ram: 32 GB DDR4
- Video Card: AMD RX 6600 XT
- Hard_Drive_Capacity: 1 TB SSD + 2 TB HDD
- Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
- Corel programs: VS2022; PSP2023; DRAW2021; Painter 2022
- Location: Levin, New Zealand
-
wkutter
- Posts: 7
- Joined: Sun Mar 20, 2011 3:00 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Quanta 363C 32.16
- processor: 1.60 GHz Intel Core i7 Q 720
- ram: 6.1 GB
- Video Card: NIVIDIA GeForce GT 230 M
- Hard_Drive_Capacity: 500 GB
- Monitor/Display Make & Model: Generic PnP Monitor 17.1"
Re: Creating a video file in BD format
I don't know if it happens with all fonts, but it happened with all of the three which I used throughout the project.Ken Berry wrote:Does it happen with all fonts, or only one or two?