DVD MovieFactory 7 SE User's Manual!
Moderator: Ken Berry
-
PJV
- Posts: 9
- Joined: Thu Aug 25, 2011 8:09 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS P6X58D
- processor: Intel I7
- ram: 6Gig
- Video Card: ATI Radeon HD 5700 Series
- sound_card: ATI High Definition Audio Device
- Hard_Drive_Capacity: 1TB
- Monitor/Display Make & Model: HP LP2475w Wide LCD Monitor
DVD MovieFactory 7 SE User's Manual!
You post a link to DVD MovieFactory 7 User's Manual in the SE forum. From what I can tell, the SE version that comes with VSPro3 is a very limited and buggy POS. Where is the DVD MovieFactory 7 SE User's Manual that points out all these limitations and purposfully disabled features???????
-
Ken Berry
- Site Admin
- Posts: 22416
- Joined: Fri Dec 10, 2004 9:36 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B550M DS3H AC
- processor: AMD Ryzen 9 5900X
- ram: 32 GB DDR4
- Video Card: AMD RX 6600 XT
- Hard_Drive_Capacity: 1 TB SSD + 2 TB HDD
- Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
- Corel programs: VS2022; PSP2023; DRAW2021; Painter 2022
- Location: Levin, New Zealand
Re: DVD MovieFactory 7 SE User's Manual!
There is no special SE version of the manual. Corel never supplied one as far as I am aware. And yes, it may be limited, but it was only ever intended the buring module originally supplied with X3, and that was the real POS!
Ken Berry
-
PJV
- Posts: 9
- Joined: Thu Aug 25, 2011 8:09 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS P6X58D
- processor: Intel I7
- ram: 6Gig
- Video Card: ATI Radeon HD 5700 Series
- sound_card: ATI High Definition Audio Device
- Hard_Drive_Capacity: 1TB
- Monitor/Display Make & Model: HP LP2475w Wide LCD Monitor
Re: DVD MovieFactory 7 SE User's Manual!
The "features list" describing VSPro3 (which Corel has conveniently deleted from their site long ago) listed DVD writing capabilities that only supposedly exist in MF7 and are not in the original POS software addon. Corel no doubt decided to add a crippled "SE" version of MovieFactory to confuse and take up enough of user's time realizing they didnt even work with VSPro3 so they could come out with a new version that we needed to buy. What coniving bums!!!Ken Berry wrote:There is no special SE version of the manual. Corel never supplied one as far as I am aware. And yes, it may be limited, but it was only ever intended the buring module originally supplied with X3, and that was the real POS!