Hi
I use MF6+ since years and never had any issue with it.
Last week I tried to create several copies (10) from my film and to my biggest surprise the second copy always crashed during the burning at about 17%.
The error message is "unspecified error".
The first disc works well and when I insert the second one for the next copy, everything starts as usual, but at about 17% the program crashes and of course I can throw away de not finished disc.
Any idea what can be the reason? I repeated the process several time with the same bad results.
Thank you very much for your help.
MF6+ Multicopies crash
-
weaver
- Posts: 523
- Joined: Fri Jun 08, 2007 7:24 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: intel i7
- ram: 16GB
- Video Card: nvidia Ge Force GF 550 Ti
- sound_card: C.Media
- Hard_Drive_Capacity: 20TB
- Monitor/Display Make & Model: FULL HD
- Corel programs: VS S6,8,10 on W XP, VS X4,6,7,2018
- Location: Austria
-
Ron P.
- Advisor
- Posts: 12002
- Joined: Tue May 10, 2005 12:45 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
- Location: Kansas, USA
Re: MF6+ Multicopies crash
Have you changed operating systems? How is your working folder setup, on a separate drive/partition? Are you doing other things with your PC while burning? To help us out, could you please go to the User Control Panel of the web board, and complete the information for your system?
Ron Petersen, Web Board Administrator
-
weaver
- Posts: 523
- Joined: Fri Jun 08, 2007 7:24 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: intel i7
- ram: 16GB
- Video Card: nvidia Ge Force GF 550 Ti
- sound_card: C.Media
- Hard_Drive_Capacity: 20TB
- Monitor/Display Make & Model: FULL HD
- Corel programs: VS S6,8,10 on W XP, VS X4,6,7,2018
- Location: Austria
Re: MF6+ Multicopies crash
Hi RonRon P. wrote:Have you changed operating systems? How is your working folder setup, on a separate drive/partition? Are you doing other things with your PC while burning? To help us out, could you please go to the User Control Panel of the web board, and complete the information for your system?
I am not aware about this. Except I added an USB controller to switch off and on some of the perifery units when the PC is turned off.
The working folder is on C drive.
I usually do not do anything else when I burn the DVDs. (Perhaps the Anti-Virus program is active and programs like Skype, and automatic updates).
Interesting is that the first and sometimes the second DVD are OK (on MF6+), but the rest crashes. Today I needed 14 DVDs for 10 usable copies.
(Unfortunately the Nero also crashed (on the same project after the 4th DVD.)
Thank you for your help.