At the beginning of my project I placed a jpeg file in the (1st) overlay track with a opening title over a black color on the main track and then cross fade to the 1st clip. With the jpeg overlay file I then select the Pan & Zoom option (preset to 'zoom in'), in preview window it all looks fine but when I render the project the jpeg overlay track appears distorted, its blown out of proportion and you only see about 1 quarter of it (top left hand quadrant). If I remove the Pan & Zoom effect from the jpeg overlay file and re-render its comes out fine.
Any suggestions? (I'm editing in HD TOD format using VS X2 pro). Is this a known bug? or can't you use 'Pan & Zoom' on the overlay track?
JPEG Image Overlay Distortion over title
Moderator: Ken Berry
-
RickMen
- Posts: 258
- Joined: Mon Mar 30, 2009 6:03 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B660M GAMING AC DDR4
- processor: Intel i7-12700F
- ram: 16GB
- Video Card: NVIDIA GeForce GT 730
- sound_card: Realtek HD Audio
- Hard_Drive_Capacity: 500GB M2 PCIe NVMe SDD
- Monitor/Display Make & Model: Philips 246V5 24inch wide LCD
- Corel programs: VS2022 Ultimate, VS2018 Ultimate
- Location: Sydney, Australia
-
Ron P.
- Advisor
- Posts: 12002
- Joined: Tue May 10, 2005 12:45 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
- Location: Kansas, USA
What aspect ratio are you using for your project, 4:3 or 16:9? Is your video file 16:9 and is your photo a 16:9 ratio?
Please read:
What dimensions etc should I use for still images in Videos?.
Please read:
What dimensions etc should I use for still images in Videos?.
Ron Petersen, Web Board Administrator