ieee1394 board

newatthis · Post by **newatthis** » Sun Sep 03, 2006 8:25 pm

fitted new ieee1394 firewire board to computer

did as i was told
only get a couple of seconds video onto computer and it crashes
help please

Post by **Ken Berry** » Sun Sep 03, 2006 9:55 pm

Well that certainly gives us a lot to go on!! (NOT!!!)

What sort of camera do you have? What are your computer specs? Was the Firewire card placed in a higher or lower slot relative to the CPU? (This can sometimes be important as far as access to resources goes...) What does 'Did what I was told' mean exactly? Did that program recognise your camera i.e. did you give it time for everything to appear on screen? Had it selected DV as the capture format (normally automatic if you have a mini DV camera attached by Firewire). Was the camera already connected and in the PLAY position when you opened VS?

In other words, we need rather more information from you before anyone can possibly offer any help...

Post by **Ron P.** » Sun Sep 03, 2006 11:55 pm

newatthis wrote:fitted new ieee1394 firewire board to computer
did as i was told
only get a couple of seconds video onto computer and it crashes
help please

Well now that'll teach you to do as you're told...

Ron P.

heinz-oz · Post by **heinz-oz** » Mon Sep 04, 2006 12:12 am

And, while we are at it, what did you fit the IE1394 to? We can only guess.

Please fill in your sytem spec's in your profile. How? http://phpbb.ulead.com.tw/EN/viewtopic. ... highlight=

Did you read this?
http://phpbb.ulead.com.tw/EN/viewtopic.php?t=8959
Once you did and do as you told, you never know, it might work.

newatthis · Post by **newatthis** » Mon Sep 04, 2006 9:53 pm

vidoman wrote:
newatthis wrote:fitted new ieee1394 firewire board to computer
did as i was told
only get a couple of seconds video onto computer and it crashes
help please
Well now that'll teach you to do as you're told...

R

on P.

computer is an advent 8710 as standard with compact disc rewriter
as add on .interface card is USB2.0 and is fitted in slot directly under CPU. every thing appears as it should and i can get about 5 seconds of video before it jamms up. camera is cannonMV6iDV. is that better

heinz-oz · Post by **heinz-oz** » Tue Sep 05, 2006 1:08 am

No, it ain't. Did you read the links from my previous post? Obviously not. There can be umpteen reasons for your problems. Do you expect us now to keep on asking variing details until we hit the right one? That aint gonna happen mate.

If you can't be bothered to fill in in your system data and give us some meaningfull details on the rest of it, I, for one, won't be bothered to give you another response.

Post by **Ken Berry** » Tue Sep 05, 2006 2:16 am

newatthis -- can you go to Control Panel > System > Hardware > Device Manager, and look down the list to IEEE1394 Bust Host Controllers. Is there a yellow question mark beside it? What does it say when you click on the + sign? (It should say something like VIA OHCI Compliant IEEE1394 Host Controller.)

Can you also tells us exactly what you did, step by step: e.g. connected the firewire cable to both camera and computer, turned camera on the PLAY position; started VS. After a little while, VS in the Capture pane recognised the camera and showed (something like) Canon MSDV as the device and automatically selected DV as the capture format.

Also, in VS, go to File > Preferences > General. What does it show as 'Instant Playback Target'? (Mine is set to 'Preview Screen'.)

And in File > Preferences > Capture, do you have the box 'Allow access to capture device's setting' checked?

Alludo USER to USER Web Board

ieee1394 board

ieee1394 board

Re: ieee1394 board

Re: ieee1394 board