No Capture Driver
Moderator: Ken Berry
-
beswift
No Capture Driver
Now I have a Desktop computer and this software with a new firewire card but with the Canon ZR600 it states that no capture driver has been loaded upon loading. Is it a non-existant capture driver?
-
Trevor Andrew
Hi
You seem to be having lots of trouble capturing via firewire.
Read this tutorial, its very good and may give you an idea to what is going wrong.
http://www.jonesgroup.net/media/vsone.htm
Also to help the forum members please update your profile to include your PC spec.
Your location Pal or Ntsc may also be useful.
Hope this helps
Trevor
You seem to be having lots of trouble capturing via firewire.
Read this tutorial, its very good and may give you an idea to what is going wrong.
http://www.jonesgroup.net/media/vsone.htm
Also to help the forum members please update your profile to include your PC spec.
Your location Pal or Ntsc may also be useful.
Hope this helps
Trevor
-
Ron P.
- Advisor
- Posts: 12002
- Joined: Tue May 10, 2005 12:45 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
- Location: Kansas, USA
Re: O.K.
Are you saying that CompUSA is still selling Ulead Video Studio 5?beswift wrote:If I find the time, I'll do all that. I'm working with two computers right now on my home network. Unfortunately, the CompUSA store I purchased the Ulead Video Studio provided verson 5.0 and nothing later.
When I got started with video editing a few years ago, I started with VS5, and it was a full, FREE program bundled with my ATI-AIW vid card..
That's got to be the most rediculous thing yet. VS5 is a phased out program, and has been for a couple of years. Talk about ripping people off...
Ron P.
Ron Petersen, Web Board Administrator
-
Trevor Andrew
Hi
I suggest you take version 5 back to the store and get a refund.
Version 5 is so old, its back in the stone age, nearly anyway.
Ulead are selling VS 8 full boxed version for £15 at their UK site, don’t know if its advertised in the US:-
http://www.ulead.co.uk/store/special.htm
Not that I am advising anyone to buy VS 8. as the version did have its problems.
The postage will probably cost more.
You need to think about using a newer version.
As for version 5, I do not think it automatically recognised the capture device, I had to ‘select the device control’ manually. And if I remember correctly the capture procedure had to be performed in the correct order. The tutorial although for vs9 is a good guide and shows the procedure.
All the Best
Trevor
I suggest you take version 5 back to the store and get a refund.
Version 5 is so old, its back in the stone age, nearly anyway.
Ulead are selling VS 8 full boxed version for £15 at their UK site, don’t know if its advertised in the US:-
http://www.ulead.co.uk/store/special.htm
Not that I am advising anyone to buy VS 8. as the version did have its problems.
The postage will probably cost more.
You need to think about using a newer version.
As for version 5, I do not think it automatically recognised the capture device, I had to ‘select the device control’ manually. And if I remember correctly the capture procedure had to be performed in the correct order. The tutorial although for vs9 is a good guide and shows the procedure.
All the Best
Trevor
-
Ron P.
- Advisor
- Posts: 12002
- Joined: Tue May 10, 2005 12:45 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
- Location: Kansas, USA
The only version being shown in the US, is VS10 or VS10 Plus. Going to Ulead Mall, USA you can no longer buy VS9, let alone any of the older versions. It seems here, once Ulead releases a newer version of a product, with the exception now of MF5, the older ones are no longer available for purchase..
Ron P.
Ron P.
Ron Petersen, Web Board Administrator
-
beswift
Version 5
CompUSA wasn't selling Version 5 as stand alone software. It was packaged with the TI DV firewire card and a firewire cord. It was being sold by BELKIN. I have been busy with other matters and haven't got onto this yet although I attempted again to install the Camcorder through the installation process. I should call Belkin which has a good support staff in California. Your suggestions will be considered. Please keep them coming!!!