Clean-Up tool for Video Studio
Moderator: Ken Berry
-
- Posts: 1
- Joined: Fri Feb 28, 2020 7:21 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: Intel I7
- ram: 8gb
- Video Card: Atx550
- Hard_Drive_Capacity: 2.25tb
- Corel programs: Video studio 2018,2019,2020
Re: Clean-Up tool for Video Studio
Install of 2020 got stuck, just like on several other posts on here from past version. Can’t install, repair or uninstalled now, repair reboots about 60% in.
Tried manual uninstall but no good.
Looking at this issue in the past, the only way is to use the cleanup tool, but there isn’t one yet for 2020.
Tried manual uninstall but no good.
Looking at this issue in the past, the only way is to use the cleanup tool, but there isn’t one yet for 2020.
-
- Posts: 183
- Joined: Mon Oct 26, 2015 8:06 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: MSI Z390
- processor: Intel i9-9900K
- ram: 16GB
- Video Card: NVIDIA GeForce 2060
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 1TB
- Monitor/Display Make & Model: Acer X233H
- Corel programs: VideoStudio, Pinnacle Studio
- Location: San Jose, California USA
Re: Clean-Up tool for Video Studio
Hi Pennysteam,
Sending you a PM, requesting log files from C:\ProgramData\VideoStudio Log Files\VS2020. We would like a look at these, first Possible the cleanup tool can help, but we won't know until we can dig in a little more.
Thanks
Sending you a PM, requesting log files from C:\ProgramData\VideoStudio Log Files\VS2020. We would like a look at these, first Possible the cleanup tool can help, but we won't know until we can dig in a little more.
Thanks
-
- Posts: 90
- Joined: Sun Aug 24, 2014 11:37 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Asrock H370M Pro-4
- processor: Intel Intel I7 8700 4.6 Ghz
- ram: 16 GB DDR4
- Video Card: Geforce Gtx 1060 Gigabyte 6GB Windforce
- sound_card: C3 Tech
- Hard_Drive_Capacity: 1 Tera SSD
- Monitor/Display Make & Model: Realtek High Definition Audio
- Corel programs: Videostudio 2019 Ultimate
- Location: Brazil
Re: Clean-Up tool for Video Studio
Maybe you should try Revo Uninstaller Pro.Pennysteam wrote:Install of 2020 got stuck, just like on several other posts on here from past version. Can’t install, repair or uninstalled now, repair reboots about 60% in.
Tried manual uninstall but no good.
Looking at this issue in the past, the only way is to use the cleanup tool, but there isn’t one yet for 2020.
-
- Posts: 178
- Joined: Tue Jan 08, 2013 12:07 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: i7 9700
- ram: 32GB
- Video Card: Gforce GTX1650
- sound_card: Sound Blaster Audigy FX
- Hard_Drive_Capacity: 1TBSSD+4GB
- Monitor/Display Make & Model: HP 24Uh
- Corel programs: VS X4-X5-X8-X10-2018-2020-2022
- Location: Catalunya (Europe)
Re: Clean-Up tool for Video Studio
Any version for removing Corel Video Studio 2020?
I have just bought the programme and I want to unisntal it and install in a new computer.
I belive I cannot run in two PCs.
Thanks!
I have just bought the programme and I want to unisntal it and install in a new computer.
I belive I cannot run in two PCs.
Thanks!
-
- Site Admin
- Posts: 13960
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
Re: Clean-Up tool for Video Studio
Hi alfons
So far Corel have not provided a cleanup tool for 2020, using Program and Features should do the job
We did have a version to test but caused more issues than it fixed
And yes you are correct we can only install VS on one machine, but can re-install when changing machines.
You will be prompted to input your e-mail used to register the program when installing on your new computer.
I would install on the new machine, prove it works then uninstall on the older PC
So far Corel have not provided a cleanup tool for 2020, using Program and Features should do the job
We did have a version to test but caused more issues than it fixed
And yes you are correct we can only install VS on one machine, but can re-install when changing machines.
You will be prompted to input your e-mail used to register the program when installing on your new computer.
I would install on the new machine, prove it works then uninstall on the older PC
Trevor
-
- Posts: 178
- Joined: Tue Jan 08, 2013 12:07 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: i7 9700
- ram: 32GB
- Video Card: Gforce GTX1650
- sound_card: Sound Blaster Audigy FX
- Hard_Drive_Capacity: 1TBSSD+4GB
- Monitor/Display Make & Model: HP 24Uh
- Corel programs: VS X4-X5-X8-X10-2018-2020-2022
- Location: Catalunya (Europe)
Re: Clean-Up tool for Video Studio
Many thanks!!!
-
- Posts: 15
- Joined: Sun Sep 02, 2018 10:27 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: X470 Taichi
- processor: Ryzen 7 2700x
- ram: 16GB
- Video Card: GTX3060Ti
- sound_card: Quad Capture
- Hard_Drive_Capacity: 300GB
- Monitor/Display Make & Model: EIZO
- Corel programs: CorelDRAW,Painter,Paintshop,VideoStudio
Re: Clean-Up tool for Video Studio
Hi
Is there a VideoStudio2020 cleanup tool available yet?
I just want to run the cleanup tool and uninstall it cleanly, but when I hear that it was having so much trouble, I'm worried.
If VideoStudio's standard uninstall system works exactly like a cleanup tool, and can uninstall cleanly, that's fine.
it's a hassle to have to use the cleanup tool after uninstalling it. Is it safe to say that it's such a high performance uninstaller this time around?
Is there a VideoStudio2020 cleanup tool available yet?
I just want to run the cleanup tool and uninstall it cleanly, but when I hear that it was having so much trouble, I'm worried.
If VideoStudio's standard uninstall system works exactly like a cleanup tool, and can uninstall cleanly, that's fine.
it's a hassle to have to use the cleanup tool after uninstalling it. Is it safe to say that it's such a high performance uninstaller this time around?

-
- Posts: 90
- Joined: Sun Aug 24, 2014 11:37 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Asrock H370M Pro-4
- processor: Intel Intel I7 8700 4.6 Ghz
- ram: 16 GB DDR4
- Video Card: Geforce Gtx 1060 Gigabyte 6GB Windforce
- sound_card: C3 Tech
- Hard_Drive_Capacity: 1 Tera SSD
- Monitor/Display Make & Model: Realtek High Definition Audio
- Corel programs: Videostudio 2019 Ultimate
- Location: Brazil
Re: Clean-Up tool for Video Studio
Since there is no Cleanup tool for it yet, I used the "Revo Uninstaller Pro".JET2020 wrote:Hi
Is there a VideoStudio2020 cleanup tool available yet?
I just want to run the cleanup tool and uninstall it cleanly, but when I hear that it was having so much trouble, I'm worried.
If VideoStudio's standard uninstall system works exactly like a cleanup tool, and can uninstall cleanly, that's fine.
it's a hassle to have to use the cleanup tool after uninstalling it. Is it safe to say that it's such a high performance uninstaller this time around?
-
- Posts: 13
- Joined: Wed Oct 22, 2014 5:14 pm
- System_Drive: D
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 1651 KBC Version 07.25
- processor: Hewlett-Packard
- ram: 6GB
- Video Card: intel HD Graphics Family
- sound_card: IDT High Definition Audio CODEC
- Hard_Drive_Capacity: 360
- Monitor/Display Make & Model: AU Optronics 13,9 Monitor
Re: Clean-Up tool for Video Studio
bonjour
y a t il une version cleanup pour video studio 2020 ?
en utilisant la procédure de Windows 10
il y a un message erreur
le logiciel est en fonction > donc impossible de continuer la désinstallation
j'ai pourtant vérifier si un process videostudio état en cours , mais rien
la version 2020 pose problème avec d'anciens formats de fichiers vidéo
plantage systématique pendant le rendu
cependant pas de problème pendant la lecture complète de la time line dans videostudio
la version 2018 est bien plus fiable
merci par avance
Rcoucou
y a t il une version cleanup pour video studio 2020 ?
en utilisant la procédure de Windows 10
il y a un message erreur
le logiciel est en fonction > donc impossible de continuer la désinstallation
j'ai pourtant vérifier si un process videostudio état en cours , mais rien
la version 2020 pose problème avec d'anciens formats de fichiers vidéo
plantage systématique pendant le rendu
cependant pas de problème pendant la lecture complète de la time line dans videostudio
la version 2018 est bien plus fiable
merci par avance
Rcoucou
-
- Site Admin
- Posts: 22319
- Joined: Fri Dec 10, 2004 9:36 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte B550M DS3H AC
- processor: AMD Ryzen 9 5900X
- ram: 32 GB DDR4
- Video Card: AMD RX 6600 XT
- Hard_Drive_Capacity: 1 TB SSD + 2 TB HDD
- Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
- Corel programs: VS2022; PSP2023; DRAW2021; Painter 2022
- Location: Levin, New Zealand
Re: Clean-Up tool for Video Studio
Our forum rules require all posts to be in English. There is a separate privately run group for French speakers. You could, however, simply use something like Google's translation unit. I speak good French but was surprised at how good the resulting translation was:
"Hello
Is there a cleanup version for video studio 2020?
using Windows 10 procedure
there is an error message
the software is running> therefore impossible to continue the uninstallation
I have yet to check if a videostudio process is in progress, but nothing
2020 version has problem with older video file formats
systematic crash during rendering
however no problem during the complete playback of the time line in videostudio
the 2018 version is much more reliable
Thanks in advance
Rcoucou"
Unfortunately, Corel have still not made a cleanup tool available.
"Hello
Is there a cleanup version for video studio 2020?
using Windows 10 procedure
there is an error message
the software is running> therefore impossible to continue the uninstallation
I have yet to check if a videostudio process is in progress, but nothing
2020 version has problem with older video file formats
systematic crash during rendering
however no problem during the complete playback of the time line in videostudio
the 2018 version is much more reliable
Thanks in advance
Rcoucou"
Unfortunately, Corel have still not made a cleanup tool available.
Ken Berry
-
- Posts: 178
- Joined: Tue Jan 08, 2013 12:07 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- processor: i7 9700
- ram: 32GB
- Video Card: Gforce GTX1650
- sound_card: Sound Blaster Audigy FX
- Hard_Drive_Capacity: 1TBSSD+4GB
- Monitor/Display Make & Model: HP 24Uh
- Corel programs: VS X4-X5-X8-X10-2018-2020-2022
- Location: Catalunya (Europe)
Problem with BCC Boris Title Studio
I have a problem with Video Studio 2020. It doesn't work properly and doesn't show all the images, videos etc
I want to completely uninstall the program but I don't know how to leave it completely clean so I can install it from 0!
In fact the problem is with Boris BCC Title Studio, it opens but it doesn't allow me to work with it.
I can't put an image, but everywhere I can see (?) question marks! No allowed to read any of the commands.
I want to completely uninstall the program but I don't know how to leave it completely clean so I can install it from 0!
In fact the problem is with Boris BCC Title Studio, it opens but it doesn't allow me to work with it.
I can't put an image, but everywhere I can see (?) question marks! No allowed to read any of the commands.
-
- Posts: 148
- Joined: Wed Apr 03, 2013 10:45 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS TUF Z270 MARK 1
- processor: Intel i7-7700K
- ram: 32GB
- Video Card: AMD Radeon RX 5700 XT
- Corel programs: VideoStudio 2022; PaintShopPro 2022
Re: Clean-Up tool for Video Studio
Here is the VS 2020 version:
VideoStudio 2020: Instructions to manually remove and reinstall VideoStudio Ultimate 2020
Everybody can think on their own, in how many places user could do an error which breaks their workstation.
One odd question is e.g. why this step is not mentioned at all??
VideoStudio 2020: Instructions to manually remove and reinstall VideoStudio Ultimate 2020
Everybody can think on their own, in how many places user could do an error which breaks their workstation.
One odd question is e.g. why this step is not mentioned at all??
You do not have the required permissions to view the files attached to this post.
--
Don't Panic
Don't Panic
-
- Advisor
- Posts: 2366
- Joined: Tue Jun 26, 2012 12:50 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Asus Prime B550M-A WI-FI AM4 mATX
- processor: AMD Ryzen 5 3600 3 6 GHz
- ram: 16GB
- Video Card: Asus Geforce GTX 1650 GDDR6 Driver 538 61
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 7 TB
- Monitor/Display Make & Model: Philips 32" IPS LED, Samsung 28" 3840x2160 UHD 4K
- Corel programs: VS2018/21/22/23 & MS 3D, MCC XL
- Location: Mornington, Vic. Australia
Re: Clean-Up tool for Video Studio
Alfons, before doing a complete uninstall try reinstalling the Bonus Pack, the issue you have has been previously reported, unfortunately Corel have been unable to provide a working VS2020 Cleanup Tool, so a complete uninstall means manually searching your computer and deleting all traces of VS2020
-
- Posts: 1
- Joined: Sun Feb 14, 2021 12:05 pm
- System_Drive: C
- 32bit or 64bit: 64 Bit
- Corel programs: Corel VideoStudio 2020
Re: Clean-Up tool for Video Studio
Hello,
Is the clean up tool for Corel Video Studio 2020 ultimate available ?
Looks like I will need it !
Thanks
Is the clean up tool for Corel Video Studio 2020 ultimate available ?
Looks like I will need it !
Thanks
-
- Site Admin
- Posts: 13960
- Joined: Thu Jan 19, 2012 6:21 am
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
- processor: 4 10 gigahertz AMD A10-7890K Radeon R7
- ram: 16 gb
- Video Card: on board
- sound_card: Realtek High Definition Audio
- Hard_Drive_Capacity: 500 SSD
- Monitor/Display Make & Model: LG W2242 [Monitor]
- Corel programs: CVSX, 19, 20, 22 PSP2023, PI, MS3D
- Location: UK
Re: Clean-Up tool for Video Studio
Kelte
welcome to the forums,
I have sent you a Private Message
welcome to the forums,
I have sent you a Private Message
Trevor