Video Studio Hotfixes and Manuals

Moderator: Ken Berry

Locked
User avatar
lata
Site Admin
Posts: 12617
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

Program Manuals

Post by lata »

Regards Trevor
User avatar
lata
Site Admin
Posts: 12617
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

CVSX7 -- Fix for Vimeo log-in

Post by lata »

Hi

Corel have provided a replacement file as a fix for the Vimeo login issue
I assume this will be included in the next service pack.

Copy the appropriate uSocialService.dll file ( 64 bit or 32 bit) and paste to your
Corel\Corel VideoStudio installation folder

I would suggest re-naming the original to “uSocialService old.dll”
Although I doubt if you will require that file again?

Hope this helps
FlickerVemio_Hot-fix.zip
(257.74 KiB) Downloaded 477 times
Regards Trevor
User avatar
lata
Site Admin
Posts: 12617
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

Hot Fix for CVSX7Mov /MP4 issues

Post by lata »

Hello

There have been some problems in using MP4 and Mov, Corel have brought out a Hot fix available from their web support pages, however I did have problems downloading from Corel.
http://howto.corel.com/en/corel?family= ... mp4lib.dll

There are many different types of Mov and MP4 video files so I am not sure if this fix covers your particular files but is worth a try.


I have attached the file and install info to this post
X7 Latest Mov Fixes.zip
(1.32 MiB) Downloaded 496 times
Regards Trevor
User avatar
lata
Site Admin
Posts: 12617
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

CVSX 9 and 10 MCE Issues

Post by lata »

Hi

A problem occurred when adding video files greater than 1 hour duration.
Corel have provided these hot fixed for X9 and X10.
This post on the open forum refers.
http://forum.corel.com/EN/viewtopic.php ... 55#p340434

If you have problems please download the appropriate zip file below.
This contains a uvMultiCamDB.dll file
Replace the existing file, I would first suggest re-naming the original as uvMultiCamDB_old.dll
Then paste the new file to the folder.

C:\Program Files\Corel\Corel VideoStudio X10

C:\Program Files\Corel\Corel VideoStudio X9
X10-20170417T075400Z-001.zip
(534.4 KiB) Downloaded 658 times
X9-20170417T075502Z-001.zip
(533.29 KiB) Downloaded 571 times
Regards Trevor
User avatar
lata
Site Admin
Posts: 12617
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

Corel Video Studio X10 / 2018 and 2019 Not launching

Post by lata »

This fix is valid only for installations of Videostudio X10 & 2018, Pro and Ultimate. This fix was not developed for previous versions. If you are running anything other than X10 & 2018, please be advised that there was no updated fix for this issue, and the only course of action we (Corel) have to offer, is a suggestion of an upgrade to the latest revision.
Post Updated 11/10/2019
It appears that for some users CVS2019 is also suffering the same fate as X10 and 2018
This fix has proven to be successful when applying to CVS2019


Instructions to replace file:

1. Download file "iEncoder.dll" from here:
http://cdn.pinnaclesys.com/SupportFiles ... ncoder.zip

2. In Windows Explorer, browse to C:\Program Files\Corel\Corel VideoStudio 2018\Common Files\MPEG

3. Extract the DLL file into this folder.

4. Start Corel VideoStudio.

alternate download
iEncoder.zip
fix for X10 and 2018 only
(62.84 KiB) Downloaded 331 times
Regards Trevor
User avatar
lata
Site Admin
Posts: 12617
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

CVS 2019 Unable to open VSP then program crashes.

Post by lata »

Hi

A hot fix was provided to one of our forum users
Please read this post by MindFlareRetro,
viewtopic.php?f=1&t=66176&p=373671#p373653

Corel Support have provided a hot fix that appears to allow problem VSP’s to open
Also indicates that it may fix some crash issues

To apply the hotfix.........

1. Close Video Studio 2019 if it is open
2. Navigate to C:\Program Files\Corel\Corel VideoStudio 2019
3. Locate the existing HerDocdll.dll file and rename it (e.g. HerDocdll-old.dll) and/or copy it to another location
4. Extract the new alternate HerDocdll.dll from the ZIP file and copy it to C:\Program Files\Corel\Corel VideoStudio 2019, replacing the renamed file (you might require administrative privileges to do this)
5. Re-launch VS19
HerDocdll.zip
(841.89 KiB) Downloaded 683 times
Regards Trevor
Locked