DVD MovieFactory 7 SE User's Manual!

Several users have been unsure where to post issues relating to the copy of MovieFactory 7 SE now supplied with VideoStudio X3. To make life easier you can post problems here.

Moderator: Ken Berry

Post Reply
PJV
Posts: 9
Joined: Thu Aug 25, 2011 8:09 pm
operating_system: Windows 7 Professional
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUS P6X58D
processor: Intel I7
ram: 6Gig
Video Card: ATI Radeon HD 5700 Series
sound_card: ATI High Definition Audio Device
Hard_Drive_Capacity: 1TB
Monitor/Display Make & Model: HP LP2475w Wide LCD Monitor

DVD MovieFactory 7 SE User's Manual!

Post by PJV »

You post a link to DVD MovieFactory 7 User's Manual in the SE forum. From what I can tell, the SE version that comes with VSPro3 is a very limited and buggy POS. Where is the DVD MovieFactory 7 SE User's Manual that points out all these limitations and purposfully disabled features???????
User avatar
Ken Berry
Site Admin
Posts: 21460
Joined: Fri Dec 10, 2004 9:36 pm
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Intel NUC7i7BNB J31145-306
processor: Core i7-7567U + 32 GB Optane
ram: 16 GB
Video Card: Intel Iris Plus 650
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 2TB
Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
Corel programs: VS 2020; PSP 2020; MS3D; ASP 3; DRAW 17
Location: Levin, New Zealand

Re: DVD MovieFactory 7 SE User's Manual!

Post by Ken Berry »

There is no special SE version of the manual. Corel never supplied one as far as I am aware. And yes, it may be limited, but it was only ever intended the buring module originally supplied with X3, and that was the real POS!
Ken Berry
PJV
Posts: 9
Joined: Thu Aug 25, 2011 8:09 pm
operating_system: Windows 7 Professional
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUS P6X58D
processor: Intel I7
ram: 6Gig
Video Card: ATI Radeon HD 5700 Series
sound_card: ATI High Definition Audio Device
Hard_Drive_Capacity: 1TB
Monitor/Display Make & Model: HP LP2475w Wide LCD Monitor

Re: DVD MovieFactory 7 SE User's Manual!

Post by PJV »

Ken Berry wrote:There is no special SE version of the manual. Corel never supplied one as far as I am aware. And yes, it may be limited, but it was only ever intended the buring module originally supplied with X3, and that was the real POS!
The "features list" describing VSPro3 (which Corel has conveniently deleted from their site long ago) listed DVD writing capabilities that only supposedly exist in MF7 and are not in the original POS software addon. Corel no doubt decided to add a crippled "SE" version of MovieFactory to confuse and take up enough of user's time realizing they didnt even work with VSPro3 so they could come out with a new version that we needed to buy. What coniving bums!!!
Post Reply