Canon R6 raw import appears to be broken

Corel Paint Shop Pro

Moderator: Kathy_9

Post Reply
ppedriana
Posts: 4
Joined: Thu Feb 04, 2021 9:13 pm
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Intel Core i9-9880H
ram: 16GB
Hard_Drive_Capacity: 1TB
Corel programs: Paint Shop Pro 2020

Canon R6 raw import appears to be broken

Post by ppedriana »

When I import a Canon R6 camera raw .cr3 file into PSP 2020, it botches the RGB channels at the pixel level. In particular the imported image has the R,G, and B pixels shifted relative to where they should be. This does not happen when I use Canon's own Digital Photo Professional software. This is not a chromatic aberration problem, as it happens to all pixels uniformly. I've attached a demonstration of PSP vs Canon import of this picture of a test pattern in a dark room. This is a crop of the original image, but the problem occurs the same across the entire larger image. I'd attach the original 16MB .cr3 if this system would let me.
Attachments
Good Canon R6 raw import.png
Good Canon R6 raw import.png (21.32 KiB) Viewed 417 times
Bad PSP R6 raw import.png
Bad PSP R6 raw import.png (34.6 KiB) Viewed 417 times
Post Reply