Wishlist for VS 2021

User avatar
Ken Berry
Site Admin
Posts: 21385
Joined: Fri Dec 10, 2004 9:36 pm
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Intel NUC7i7BNB J31145-306
processor: Core i7-7567U + 32 GB Optane
ram: 16 GB
Video Card: Intel Iris Plus 650
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 2TB
Monitor/Display Make & Model: Kogan 32" 4K 3840 x 2160
Corel programs: VS 2020; PSP 2020; MS3D; ASP 3; DRAW 17
Location: Levin, New Zealand

Re: Wishlist for VS 2021

Post by Ken Berry »

Unfortunately, we do not accept any language except English here. You could always use a service like Google's Translate which gives a good version of your post:

"Hello
Corel user since version x4, x7, x8, x10 etc… and now VideoStudio 2018 which works perfectly.
I recently switched to the 2020 version, but this version seems buggy and much more unstable than mine and I would even say unusable with Mercalli in xx.mpg output file.
After opening an exchange by email ref 6364269 Corel asks me to connect to my PC without telling me in return if it is having the same problems. My data is private so I refused this connection by requesting a refund for this update which is only giving me problems.
Incidentally, this problem was confirmed after installing it with a friend of mine to whom I recommended VideoStudio. He couldn't get the 2018 version (definitive working), because the 2020 version was also very unstable and unusable for DVD making."

I couldn't quite understand what you meant about your friend and VS 2018, but that does not really matter. I am also not sure your complaint should be here in this Wish List as it does not suggest anything specific.
Ken Berry
rcoucou
Posts: 13
Joined: Wed Oct 22, 2014 5:14 pm
operating_system: Windows 7 Home Premium
System_Drive: D
32bit or 64bit: 64 Bit
motherboard: Hewlett-Packard 1651 KBC Version 07.25
processor: Hewlett-Packard
ram: 6GB
Video Card: intel HD Graphics Family
sound_card: IDT High Definition Audio CODEC
Hard_Drive_Capacity: 360
Monitor/Display Make & Model: AU Optronics 13,9 Monitor

Re: Wishlist for VS 2021

Post by rcoucou »

"Hello ken
sorry but i can read the post directly en french via google

Corel user since version x4, x7, x8, x10 etc… and now VideoStudio 2018 which works perfectly.
I recently upgraded to the 2020 version, but this version seems buggy and much more unstable than mine and I would even say unusable with Mercalli as an xx.mpg output file.
opening an exchange by email ref 6364269 Corel asks me to connect to my PC without telling me in return if it has the same problems My data is private so I refused this connection by requesting a refund for this update day that only gives me problems.
Incidentally, this issue was confirmed after I installed it with a friend of mine who I recommended VideoStudio to. He couldn't get the 2018 version (which definitely works) because the 2020 version was also very unstable and unusable for DVD authoring. "

all this with the aim that the next version of corel or to have a real functional update of this software or at least to market a version which keeps the previous functionality
HumblyDriven
Posts: 11
Joined: Wed May 20, 2020 8:09 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
Contact:

Re: Wishlist for VS 2021

Post by HumblyDriven »

Make it to where we can delete all folders. Like backgrounds, I don't use it it should be an option to delete it. Also, save as I want to set a custom folder not go straight to my projects I should be able to set a custom folder. Every time I want to save a project have to go on a mission to my fav folder. Another is LUTS it would be nice to buy some custom LUTS seeing as I can't use custom ones people made for photoshop. It would be nice if we could buy some from ya'll for other people who use the program at the home and get more screen. I'll post images also. Lastly the crashing. It's always crashing when it seems to be overworked. Hope this helps
Attachments
Untitled - Corel VideoStudio2.png
Untitled - Corel VideoStudio.png
User avatar
lata
Site Admin
Posts: 12575
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

Re: Wishlist for VS 2021

Post by lata »

HumblyDriven
Backgrounds, I would minimise the selection so only Backgrounds is listed, then simply ignore it.
You have created your own folders that can also have sub folders
I doubt that Corel will change this to allow us to hide, although that option was applied to some folders in past versions I think for the audio folders.

Saving VSP, yes a bit of a pain when saving NEW projects, but then where should a new project be saved to.
If you create a new empty project and save it to your folder, then when you need to start a new Project it can be opened from File, showing at the bottom of the list.
Then File Save As will allow you to give the vsp a new name and in your folder not the programs default folder.
Regards Trevor
fingerbreaker
Posts: 76
Joined: Sat Mar 19, 2016 5:20 pm
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit

Re: Wishlist for VS 2021

Post by fingerbreaker »

If a custom-made mask file used in a project is moved or deleted, VS does not prompt for a re-link but rather just uses another file as a mask. Instead, VS should follow the same re-link protocol used for other missing clips: provide the filename of the original mask file and give the user the ability to browse for the clip in a different location.
fingerbreaker
Posts: 76
Joined: Sat Mar 19, 2016 5:20 pm
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit

Re: Wishlist for VS 2021

Post by fingerbreaker »

The ability to query VS on the filename of a mask file used on a clip. Currently, the user can select "Blending, Mask Modes, Mask Frame" and see a list of thumbnail images representing the mask file being applied to the clip, but there is no way to identify the filename or location of the file used.

This would be useful when migrating a project to a new drive or folder since mask files cannot (currently) be re-linked by VS.
asik1
Posts: 3100
Joined: Thu Apr 17, 2014 6:07 am
operating_system: Windows 7 Professional
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: H170M-E D3
processor: i5-6600
ram: 8gb
Video Card: GTX1050
Hard_Drive_Capacity: No hoarder
Monitor/Display Make & Model: Philips 19" + samsung 19"
Corel programs: VS-X9.2
Location: Israel

Re: Wishlist for VS 2021

Post by asik1 »

fingerbreaker wrote:
Wed Jan 27, 2021 9:29 pm
The ability to query VS on the filename of a mask file used on a clip. Currently, the user can select "Blending, Mask Modes, Mask Frame" and see a list of thumbnail images representing the mask file being applied to the clip, but there is no way to identify the filename or location of the file used.

This would be useful when migrating a project to a new drive or folder since mask files cannot (currently) be re-linked by VS.
once you save your project as smart package the mask will follow
TonyP
Posts: 911
Joined: Mon Mar 12, 2012 11:38 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Gigabtye X570 Elite
processor: AMD Ryzen 9 3900X 12core 24threads
ram: 32GB 3200
Video Card: MSI Gaming X RX480 8GB
sound_card: Realtek
Hard_Drive_Capacity: 10TB
Monitor/Display Make & Model: LG 27" IPS 4k, Acer 24" 1920x1080
Corel programs: VS2020, PSP2019, Aftershot 3
Location: Lublin, Poland

Re: Wishlist for VS 2021

Post by TonyP »

I guess the "wish list for 2021" is now over with the release of the program.
Time to start the wish list for 2022!!
User avatar
lata
Site Admin
Posts: 12575
Joined: Thu Jan 19, 2012 6:21 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X 0x
processor: 4 10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: CVSX10, 18, 19, 20, PSP, PI, MS3D
Location: UK
Contact:

Re: Wishlist for VS 2021

Post by lata »

TonyP wrote:
Tue Feb 09, 2021 4:21 pm
I guess the "wish list for 2021" is now over with the release of the program.
Time to start the wish list for 2022!!
As far as i know the 2021 program has not been released as it is not available for sale on the Corel web site

and yes we will get round to creating a new wish list
Regards Trevor
TonyP
Posts: 911
Joined: Mon Mar 12, 2012 11:38 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Gigabtye X570 Elite
processor: AMD Ryzen 9 3900X 12core 24threads
ram: 32GB 3200
Video Card: MSI Gaming X RX480 8GB
sound_card: Realtek
Hard_Drive_Capacity: 10TB
Monitor/Display Make & Model: LG 27" IPS 4k, Acer 24" 1920x1080
Corel programs: VS2020, PSP2019, Aftershot 3
Location: Lublin, Poland

Re: Wishlist for VS 2021

Post by TonyP »

Got the email today for it from Corel. Loyalty offer.
Snake11
Posts: 35
Joined: Sat Apr 18, 2015 4:11 pm
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: MSI B550 GAMING
processor: Ryzen 9 5900X
ram: 32GB
Video Card: Nvidia GeForce RTX 3070
Corel programs: Corel Video Studio 2021 Ultimate

Re: Wishlist for VS 2021

Post by Snake11 »

TonyP wrote:
Tue Feb 09, 2021 5:00 pm
Got the email today for it from Corel. Loyalty offer.
I got it too. I plan to take a risk and buy this product :D
excalibur1814
Posts: 34
Joined: Fri Jun 02, 2017 9:44 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: AORUS Z490 ELITE Gaming
processor: i5-10600
ram: 32GB
Video Card: nVidia 1050
sound_card: Onboard
Hard_Drive_Capacity: 750gb
Monitor/Display Make & Model: AOC CU34G2X/BK 34"
Corel programs: Videostudio 2020, PSP 2020
Contact:

Re: Wishlist for VS 2021

Post by excalibur1814 »

Time to create the new 2022 version of this thread. 2021 is HERE! WOOOOoOOo crash. Sorry, had to launch it again. Glad I saved.
Post Reply