NEW! PaintShop Pro 2019

Export settings advice needed

Moderator: Kathy_9

Export settings advice needed

Postby Ken Veal » Mon Aug 27, 2018 11:33 am

I am working on jpeg images in Photo Mirage, both in landscape and portrait mode.I want to use them in a slideshow Video Studio 2018 project which will authored to DVD and want to keep the aspect ratio.Can some one please advise me what settings it is best to use.
Ken
Ken Veal
 
Posts: 1570
Joined: Wed Oct 12, 2005 7:21 pm
Location: London,England
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: msi mpg z390 gaming edge ac lga 1151 ddr4
processor: 3.60 gigahertz Intel Core i9-9900K
ram: 32 GB
Video Card: EVGA GeForceGTX 760 2GB GDDR5 PCI E 3.0
Hard_Drive_Capacity: 1250GB SSD
Monitor/Display Make & Model: Asus VS238H-P 23 inch Widescreen LED
Corel programs: PaintSPro2019Ult.PhotoMirage.VS.2018 Ult

Re: Export settings advice needed

Postby lata » Tue Aug 28, 2018 9:15 am

Hi Ken
First what version of PhotoMirage are you using?
The purchased version has a few more export options whereas the free version provided with PSP has some limitations
When you go to File Export the window shows a lot of options, if you see a “custom” option, far right then you have the full version.
Otherwise you can only use the presets. I would try the Gallery, that creates a Mpeg4

You could crop your original image to 16:9 ratio, 1920 x 1080 would be suitable
Then the final output should use the entire image to fill the video frame.

There is an option from Export to “Size Image to fill the frame” that will crop the image to 16:9, loosing detail top and bottom.
That option does not resize but crops the image.

You should experiment with those settings.
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 10802
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Export settings advice needed

Postby Ken Veal » Tue Aug 28, 2018 11:00 am

Thanks Trevor,I have the full version.With a file type of MP4, the 1920x1080 16.9 image size does what I want with a landscape image.What file size is it best to use for a portrait mode image?
Ken
Ken Veal
 
Posts: 1570
Joined: Wed Oct 12, 2005 7:21 pm
Location: London,England
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: msi mpg z390 gaming edge ac lga 1151 ddr4
processor: 3.60 gigahertz Intel Core i9-9900K
ram: 32 GB
Video Card: EVGA GeForceGTX 760 2GB GDDR5 PCI E 3.0
Hard_Drive_Capacity: 1250GB SSD
Monitor/Display Make & Model: Asus VS238H-P 23 inch Widescreen LED
Corel programs: PaintSPro2019Ult.PhotoMirage.VS.2018 Ult

Re: Export settings advice needed

Postby lata » Tue Aug 28, 2018 2:06 pm

Hi Ken
For portrait the program will create a video same size as the image.
Unless you choose another size, then the video will be stretched / distorted to the new size, not really what you want.

For all video we do not seem to have a choice of data rates, but a quality choice, Medium by default, then Low or High what is provided seems quite acceptable for a video file.
Not much to go wrong.
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 10802
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D


Return to PhotoMirage

Who is online

Users browsing this forum: No registered users and 0 guests