Hi everybody!
I was wondering if anybody knows how to remove the date in a video? I am using Video Studio 11.
If anybody can tell me? Thanks a lot!
Heleen
Date in video
Date in video
by heleen busscher » Thu May 15, 2008 9:03 am
- heleen busscher
- Posts: 5
- Joined: Thu May 15, 2008 8:52 am
by jparnold » Thu May 15, 2008 9:56 am
Welcome.
I assume that you mean that while filming (recording) you had "display date" set?
If so then I'm afraid it's there to stay. The only option you have is to 'mask' which would then result in a splash of say a solid colour over the date - wouldn't look nice.
I assume that you mean that while filming (recording) you had "display date" set?
If so then I'm afraid it's there to stay. The only option you have is to 'mask' which would then result in a splash of say a solid colour over the date - wouldn't look nice.
John a
VS X6 Pro, Paint Shop Pro X2, Audacity, Panasonic HC-X920M, Canon SX50 HS
VS X6 Pro, Paint Shop Pro X2, Audacity, Panasonic HC-X920M, Canon SX50 HS
-
jparnold - Advisor
- Posts: 856
- Joined: Sat Dec 17, 2005 10:45 am
- Location: Blue Mountains, NSW, Australia
- operating_system: Windows 7 Home Premium
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte GA-H87M-HD3
- processor: Intel Pentium i7-4770 3.4Ghz
- ram: 8GB DDR3
- Video Card: Gigabyte GTX1050
- sound_card: Onboard Realtec ALC887
- Hard_Drive_Capacity: 1264Gb mix
- Monitor/Display Make & Model: Samsung S27C450B
- Corel programs: Videostudio X6, Paint Shop Pro X8
by heleen busscher » Thu May 15, 2008 11:11 am
Thank you for your reply!
I'm afraid Im working with a Sony Camera (DCR-DVD205) and there is no option to remove the date in the display (or at least I do not know the option). While recording I do not see the date in the screen, only when looking back at the camera or on the computer.
Heleen
I'm afraid Im working with a Sony Camera (DCR-DVD205) and there is no option to remove the date in the display (or at least I do not know the option). While recording I do not see the date in the screen, only when looking back at the camera or on the computer.
Heleen
- heleen busscher
- Posts: 5
- Joined: Thu May 15, 2008 8:52 am
by skier-hughes » Thu May 15, 2008 11:45 am
Thereshould be something in the manual to stop it from displaying this info, as it is part of meta data rather than the video, so I'd suggest a good read of that and you should find out how to display your video without it.
Otherwise, it as as jp said, putting something over it to cover it up.
Otherwise, it as as jp said, putting something over it to cover it up.
- skier-hughes
- Microsoft MVP
- Posts: 2688
- Joined: Thu Jul 21, 2005 10:09 am
- Location: UK
- operating_system: Windows 8
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: gigabyte
- processor: Intel core 2 6420 2.13GHz
- ram: 4GB
- Video Card: NVidia GForce 8500GT
- sound_card: onboard
- Hard_Drive_Capacity: 36GB 2TB
by jparnold » Thu May 15, 2008 11:51 am
Heleen
I note that your camcorder records to DVD and perhaps they record differently from what I am accustomed to but I would have thought that you should have the option of recording with and without the date recorded.
I have checked the manual for your camera and it certainly appears that the date/time is AUTOMATICALLY recorded whether you want it or not (page 28 ). Very strange that you don't have control of this. Maybe another one of the expert users may have an answer.
I note that your camcorder records to DVD and perhaps they record differently from what I am accustomed to but I would have thought that you should have the option of recording with and without the date recorded.
I have checked the manual for your camera and it certainly appears that the date/time is AUTOMATICALLY recorded whether you want it or not (page 28 ). Very strange that you don't have control of this. Maybe another one of the expert users may have an answer.
John a
VS X6 Pro, Paint Shop Pro X2, Audacity, Panasonic HC-X920M, Canon SX50 HS
VS X6 Pro, Paint Shop Pro X2, Audacity, Panasonic HC-X920M, Canon SX50 HS
-
jparnold - Advisor
- Posts: 856
- Joined: Sat Dec 17, 2005 10:45 am
- Location: Blue Mountains, NSW, Australia
- operating_system: Windows 7 Home Premium
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Gigabyte GA-H87M-HD3
- processor: Intel Pentium i7-4770 3.4Ghz
- ram: 8GB DDR3
- Video Card: Gigabyte GTX1050
- sound_card: Onboard Realtec ALC887
- Hard_Drive_Capacity: 1264Gb mix
- Monitor/Display Make & Model: Samsung S27C450B
- Corel programs: Videostudio X6, Paint Shop Pro X8
by lancecarr » Thu May 15, 2008 12:42 pm
Hi Heleen,
Your cam records MPEG2 files on to the dvd in the cam so the date info is handled a little differently than the way a tape cam would handle it.
Each individual file it records has, as part of its information the date and time. However this is not displayed by default. As jparnold says the manual shows you how to set the data/time up on P.25 but that only means that the information is being recorded, not displayed. If you go to page 82 you will see options ofr date/time display.
This problem has come up before on the forum with DVD cams and it is always because the cam has been set to DISPLAY the date/time info so it becomes part of the recording.
Just to be sure, does the date and time show on the screen when you have imported the files into your computer using VS and are viewing them in VS?
Your cam records MPEG2 files on to the dvd in the cam so the date info is handled a little differently than the way a tape cam would handle it.
Each individual file it records has, as part of its information the date and time. However this is not displayed by default. As jparnold says the manual shows you how to set the data/time up on P.25 but that only means that the information is being recorded, not displayed. If you go to page 82 you will see options ofr date/time display.
This problem has come up before on the forum with DVD cams and it is always because the cam has been set to DISPLAY the date/time info so it becomes part of the recording.
Just to be sure, does the date and time show on the screen when you have imported the files into your computer using VS and are viewing them in VS?
- lancecarr
- Moderator
- Posts: 1130
- Joined: Sat Dec 11, 2004 6:34 am
- Location: Taipei, Taiwan
- operating_system: Windows 10
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: eMachines ET1861
- processor: 3.20 gigahertz Intel Core i5 650
- ram: 12GB
- Video Card: ATI Radeon HD 5400 Series
- sound_card: ATI High Definition Audio Device
- Hard_Drive_Capacity: 700GB
by heleen busscher » Thu May 15, 2008 12:48 pm
Yes the date and time are showed on the screen when I have imported the files into my computer.
Thank you all for the information!
Regards,
Heleen
Thank you all for the information!
Regards,
Heleen
- heleen busscher
- Posts: 5
- Joined: Thu May 15, 2008 8:52 am
date
by nikollina » Wed May 21, 2008 9:56 pm
MY UNIT IS ALSO A SONY CAMERA. THERE IS NO DATE ON MY FILM, AND I HAVE EVEN TRIED MY ASSEMBLIES OF FILMS WITH ANOTHER SOFTWARE AND IT IS NOT OVER DATE, JUST WITH ULEAD VIDEOSTUDIO 11 +. THIS DID NOT WE HAVE TO THE PROBLEM BUT THE SOFTWARE ULEAD. IF YOU FIND THE PROBLEM WELL I WOULD KNOW THE SOLUTION ... THANKS 
NIKOLLINA
- nikollina
- Posts: 3
- Joined: Wed May 21, 2008 9:51 pm
by Ron P. » Thu May 22, 2008 12:50 am
Welcome to the forums Nikollina,
Is your Sony camcorder, a Mini-DV, or Digital-8? DV (avi) has the date/time data. This does not have to be visible. Go to the Preferences dialog window (Press F6 on your keyboard, or File menu>Preferences). Towards the bottom of the first tab (General) there is an option Display DV timecode on Preview Window. Simply uncheck the box beside it.
The date/time is only displayed during preview in clip mode. It is not displayed in finished video/dvd.
Lastly typing in all CAPS is considered shouting in net etiquette. So please do not SHOUT..
Is your Sony camcorder, a Mini-DV, or Digital-8? DV (avi) has the date/time data. This does not have to be visible. Go to the Preferences dialog window (Press F6 on your keyboard, or File menu>Preferences). Towards the bottom of the first tab (General) there is an option Display DV timecode on Preview Window. Simply uncheck the box beside it.
The date/time is only displayed during preview in clip mode. It is not displayed in finished video/dvd.
Lastly typing in all CAPS is considered shouting in net etiquette. So please do not SHOUT..
Ron Petersen, Web Board Administrator
-
Ron P. - Site Admin
- Posts: 12197
- Joined: Tue May 10, 2005 12:45 am
- Location: Kansas, USA
- operating_system: Windows 10
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
same problem with heleen
by nikollina » Thu May 22, 2008 1:55 am
Sorry for my English, I am French and I translated with google. my camcorder is sony handycam DCRDVD405, the movie on my computer it has no date just as i imported in ulead it inscribed on my movie a date and time. With other software cyberlink there was no date on it. I did not understand the problem yet I am not a novice. I have the same problem as heleen. thank you
NIKOLLINA
- nikollina
- Posts: 3
- Joined: Wed May 21, 2008 9:51 pm
- sjj1805
- Posts: 14914
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: C
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by almatl » Sat May 24, 2008 9:26 pm
The problem is probably not the camera. The newer DVD cameras embed the date/time stamp in the mpg file, not the video.
There is a bug in Video Studio 11. The most logical option, "Display DV time code on Preview Window" does not work. The stamp remains on, even in the completed video.
The stamp is definitely NOT embedded in the video.
Pinnacle Studio 10 does not pick up the stamp.
Windows Movie Maker 5 does not pick up the stamp.
Only ULead Video Studio 11 picks it up but doesn't give you a switch to turn it off.
This would be a great feature for editing videos if it worked right.
I would like to keep the time stamp in my original mpg files (for posterity) so I really don't want to turn it off in my camera just for a "work around".
The only option I have is to re-render the mpg files using Pinnacle so there won't be a time stamp on a source mpg while I make my video.
Would it really be that hard for Corel/ULead to fix the switch to turn it on and off.
There is a bug in Video Studio 11. The most logical option, "Display DV time code on Preview Window" does not work. The stamp remains on, even in the completed video.
The stamp is definitely NOT embedded in the video.
Pinnacle Studio 10 does not pick up the stamp.
Windows Movie Maker 5 does not pick up the stamp.
Only ULead Video Studio 11 picks it up but doesn't give you a switch to turn it off.
This would be a great feature for editing videos if it worked right.
I would like to keep the time stamp in my original mpg files (for posterity) so I really don't want to turn it off in my camera just for a "work around".
The only option I have is to re-render the mpg files using Pinnacle so there won't be a time stamp on a source mpg while I make my video.
Would it really be that hard for Corel/ULead to fix the switch to turn it on and off.
- almatl
- Posts: 6
- Joined: Tue May 20, 2008 3:21 pm
by Ron P. » Sat May 24, 2008 9:41 pm
No, it is not a bug or problem with VS, as I've yet to have a date/time stamp appear with any mpeg file, and it only is present in DV files, during Clip Mode Preview, if I have the option checked.
Display DV Timecode... does in fact work, for DV files only, as the name states.
Display DV Timecode... does in fact work, for DV files only, as the name states.
Ron Petersen, Web Board Administrator
-
Ron P. - Site Admin
- Posts: 12197
- Joined: Tue May 10, 2005 12:45 am
- Location: Kansas, USA
- operating_system: Windows 10
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: Hewlett-Packard 2AF3 1.0
- processor: 3.40 gigahertz Intel Core i7-4770
- ram: 16GB
- Video Card: NVIDIA GeForce GTX 645
- sound_card: NVIDIA High Definition Audio
- Hard_Drive_Capacity: 4TB
- Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
- Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter
by almatl » Sat May 24, 2008 11:44 pm
vidoman, thank you. I respect you for your knowledge and your efforts.
However . . . . . here is a small DV mpg file:
http://almatl.home.comcast.net/08051622.mpg
It was shot using a Sony DCR-DVD405 last week. It was loaded onto my system directly from the camera. It has not been modified in any way.
If you view it using Windows Media Player you will notice that there is NO time stamp.
If you load it into Video Studio 11 you will see there IS a time stamp.
I can't get Video Studio 11 to turn it off. The Preferences option Display DV time code on preview window will not turn it off.
None of my other software shows it (Windows Movie Maker 5-Pinnacle Studio 10) nor do they give an option to see it.
Even older versions of Video Studio did not have a problem with it (I have had the camera for a year).
Video Studio: Version 11.0.0157.0 Plus
Dolby Digital Power Pack 1.0
System: Windows XP Professional Service Pack 2
Pentium 4 with 2GB Ram
Display Adapter NVIDIA GeForce FX 5200
The mpg file contains a DV time code.
If it is not a bug in Video Studio 11 then please . . . what is the problem?
Please don't tell me it is the camera, I like the DV time code attached to the mpg files. I just need to turn it on and off.
However . . . . . here is a small DV mpg file:
http://almatl.home.comcast.net/08051622.mpg
It was shot using a Sony DCR-DVD405 last week. It was loaded onto my system directly from the camera. It has not been modified in any way.
If you view it using Windows Media Player you will notice that there is NO time stamp.
If you load it into Video Studio 11 you will see there IS a time stamp.
I can't get Video Studio 11 to turn it off. The Preferences option Display DV time code on preview window will not turn it off.
None of my other software shows it (Windows Movie Maker 5-Pinnacle Studio 10) nor do they give an option to see it.
Even older versions of Video Studio did not have a problem with it (I have had the camera for a year).
Video Studio: Version 11.0.0157.0 Plus
Dolby Digital Power Pack 1.0
System: Windows XP Professional Service Pack 2
Pentium 4 with 2GB Ram
Display Adapter NVIDIA GeForce FX 5200
The mpg file contains a DV time code.
If it is not a bug in Video Studio 11 then please . . . what is the problem?
Please don't tell me it is the camera, I like the DV time code attached to the mpg files. I just need to turn it on and off.
- almatl
- Posts: 6
- Joined: Tue May 20, 2008 3:21 pm
25 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 11 guests