NEW! PaintShop Pro 2019

VideoStudio: Rendering for You Tube.

Post a link to your videos and photographs created with Corel (former Intervideo-Ulead) Products and get feedback from others.

Moderators: Ron P., Ken Berry

VideoStudio: Rendering for You Tube.

Postby sjj1805 » Sat Mar 17, 2007 1:56 am

A few times I have seen members ask how to render their videos to be used on You Tube. hope the following may assist by showing one method that can be used (You can of course use other methods.)

htchien wrote:The suggested video format for YouTuBe should be MPEG-4, not MPEG3.

To render your video to MPEG-4, first you need to download the DivX codec pack from http://www.divx.com , then in VS go to the Share tab, select Create Video File to create an 320x240 AVI file with the DivX codec and MP3 audio.

H.T.


I have created a template for creating my videos to be used on You Tube.
The following screen shots should show how to set up the template and the settings I have used. My settings are PAL, you will have to make minor alterations if you use NTSC.

Image

Image

Image

Image

Image

Image

Image

For further information about setting up the DivX Codec with VideoStudio please view:
Using DivX Pro™ with Ulead VideoStudio
Last edited by sjj1805 on Sun Feb 17, 2008 8:39 pm, edited 2 times in total.
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

MPEG4 I-pod

Postby levisurfer » Tue Apr 10, 2007 12:06 am

Hiya
I note that you have the options to use MPEG 4.
I don't have these options - van you please advise how I can get them?
levisurfer
 

Re: MPEG4 I-pod

Postby sjj1805 » Tue Apr 10, 2007 2:28 am

levisurfer wrote:Hiya
I note that you have the options to use MPEG 4.
I don't have these options - van you please advise how I can get them?


sjj1805 wrote:........
htchien wrote:.......To render your video to MPEG-4, first you need to download the DivX codec pack from http://www.divx.com , then in VS go to the Share tab, select Create Video File to create an 320x240 AVI file with the DivX codec and MP3 audio.

H.T.

..........
For further information about setting up the DivX Codec with VideoStudio please view:
Using DivX Pro™ with Ulead VideoStudio
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

rendering for you tube

Postby jimzjazz » Wed Apr 11, 2007 11:38 am

When I came to the 'compression' part of your EX. tutorial up popped a reference to 'DIVX6.5.1
I can only suppose I must have downloaded this when following the divx Instrs. ( as this is the version I've now got)
Question: will this still be OK to use with reference to the'MPEG4 FOR YOU TUBE' or will I need to 'download' XVI MPEG-4
Yours
JIM
jimzjazz
 
Posts: 23
Joined: Fri Oct 27, 2006 9:12 am
Location: UK

Postby sjj1805 » Wed Apr 11, 2007 7:34 pm

Click the drop down list to see if you have Xvid. If not then Yes, that is the correct codec for you to choose.

In fact I have created a few purpose built templates two of which use the
DivX 6.4.0 codec. The steps are the same as above.

(see the image a couple of posts up and just above the one showing Youtube you will see the other two I created - both with DivX)
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

Postby htchien » Tue Apr 24, 2007 11:06 am

Hi Steve, some images on ImageShack.us are not viewable. Are them deleted by accident?
Ted (H.T.)

The message is provided AS IS with no warranties and confers no rights. For official tech support please contact Corel Tech Support.

My YouTube channel
User avatar
htchien
Advisor
 
Posts: 2198
Joined: Sat Dec 11, 2004 12:10 pm
Location: Taipei, Taiwan
operating_system: Mac
System_Drive: C
32bit or 64bit: 64 Bit

Postby sjj1805 » Tue Apr 24, 2007 2:47 pm

The pictures are still present. The problem with Imageshack (A free hosting service) is that the pictures are sometimes very slow to download especially at peak demand periods.

If an image fails to load, try right clicking and selecting view image.
This should force the browser into downloading it again.
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

Postby Nessah » Wed Apr 25, 2007 7:56 am

So I followed this and when I try to play it in Windows Media Player I get an error, this pin cannot use the supplied media type error number 8004022A. Any ideas?
Nessah
 

Postby sjj1805 » Wed Apr 25, 2007 10:35 am

That is normal, windows Media Player does not play MPEG4 DivX or Xvid files.
Don't worry though, they will play in your browser from You Tube.
Take a look at this one as an example

Video: Multi Camera Laurel & Hardy

This was created in the manner described in this thread.
To play the original file on you PC rather then via the internet, you need to install a DivX player
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

Postby Nessah » Wed Apr 25, 2007 10:54 pm

Oh ok Thank you!
Nessah
 

Postby Hambone » Mon Jul 02, 2007 9:58 pm

If you are using VS11 all you have to do is select
Share
Create video file
mpeg4
and Ipod mpeg4.
There is two ipod settings. the fisrt one will give you a smaller file.
Thats all i done anyway and i have up loaded quite alot.
If you search youtube for Hambonep88 and wateva94 on youtube you will
see the ones i have uploaded.
I do not have divx on my computer.
Hambone
 

Postby sjj1805 » Tue Jul 03, 2007 12:31 am

Why not post some links to your videos in our Members Samples Forum.

Remember- there are always several ways to cook an egg
Boiled, scrambled, fried, poached etc. The same goes for videos.
What is important is that you find something that works for you.
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

Youtube template versus IPOD MP4 on VS10+

Postby tommytucker » Fri Jul 06, 2007 7:58 pm

I THINK I see the best quality on my uploaded test youtube vids to be the youtube template settings described in this post. THANKS!
tommytucker
 
Posts: 253
Joined: Wed May 10, 2006 3:17 am

Postby sjj1805 » Sat Jul 07, 2007 4:17 pm

I have discovered how to create and share user defined movie templates. This should make life easier for all of us.

Making and Sharing VideoStudio Movie Templates

Come on ladies and gents - lets get sharing!!

:) :) :)
sjj1805
 
Posts: 14914
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

Postby somegeek » Sat Jul 14, 2007 8:05 pm

Was wondering if there was any way I could tweak VS to help with YouTube quality renders. Brilliant stuff - thanks for sharing this!

somegeek
somegeek
 

Next

Return to Member's Samples

Who is online

Users browsing this forum: No registered users and 2 guests