NEW! PaintShop Pro 2019

Vitascene V3 - Some filters are missing

Vitascene V3 - Some filters are missing

Postby Airone » Sat Jun 15, 2019 12:09 pm

Hello all,

it's just a few days since I installed Videostudio Ultimate 2019 and I'm already using it in full time. But now I wanted to use the Vitascene video filters, but I realized that some (example tilt-shift) are not present. Why? Is it possible to download and install them?
Thanks in advance.
Airone
 
Posts: 17
Joined: Tue May 14, 2013 4:57 pm
Location: Rome Italy
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
processor: Intel Core I7-4770S 3.10Ghz
ram: 8GB
Video Card: Intel HD Graphics 4600
sound_card: OnBoard
Hard_Drive_Capacity: 2TB
Monitor/Display Make & Model: Acer S222HQL
Corel programs: VideoStudio Ultimate 2019 64bit

Re: Vitascene V3 - Some filters are missing

Postby lata » Sat Jun 15, 2019 5:33 pm

Hi Airone

What version of Video Studio were you previously using?
For 2018 Vitascene used version 2, and 2019 appears to be updated to V3.

I have looked but cannot find “tilt-Shift” in either 2018 or 2019, if you can provide a screen shot showing Tilt-Shift may help?
If you are using an earlier version then it may be possible to copy the Vitascene across to 2019, hopefully would work?

Post updated
Although my library shows 2018 as using version 2, it is actually Version 3.0.259
I checked 2019, 2018, X10, X9, an X7 all are using the same version 3.0.259
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 10911
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Vitascene V3 - Some filters are missing

Postby gewb » Sat Jun 15, 2019 6:21 pm

Trevor, when you installed 2019 it likely over wrote the previous lower versions. I have VS2018 loaded and Vitascene is version 2.0.244.

However, I also have VS2018 and VS2019 loaded on a different box. Those Vitascene versions both are 3.0.259 - VS2018 version was updated when I installed 2019.

However, neither version as tilt-shift.
gewb
 
Posts: 254
Joined: Wed Dec 02, 2015 3:29 am
Location: Colorado, USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: MSI X470 Gaming Plus
processor: AMD Ryzen 7 2700X
ram: 16GB
Video Card: AMD R9-270
Hard_Drive_Capacity: 5TB
Monitor/Display Make & Model: LG 24MK430
Corel programs: X10.5 Ult., 2018 & 2019 Ult.

Re: Vitascene V3 - Some filters are missing

Postby lata » Sat Jun 15, 2019 6:57 pm

Thanks Gary
I suspect you are correct but strange that my VS 2018 library shows V2.0, yet using Vitascene shows 3.0.259
We do know however that installing 2019 has affected earlier versions in some way or another.
Most confusing and a little annoying

Like you I cannot find Tilt-Shift
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 10911
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Vitascene V3 - Some filters are missing

Postby Airone » Sat Jun 15, 2019 7:09 pm

Hi all,

At this link (https://vimeo.com/23010488) there is a video tutorial that explains how to apply the Vitascene V2 tilt-shift filters (#620 #630 #631 #638) to a movie. In this case Vitascene is installed inside Adobe Premiere, but this should not be influential on the existence or not of a Vitascene filter. Furthermore, by watching the video, you can clearly see the list of filters existing in the Vitascene application and the tilt-shift filters are some of those that are missing in the version contained in VideoStudio Ultimate 2019.
Airone
 
Posts: 17
Joined: Tue May 14, 2013 4:57 pm
Location: Rome Italy
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
processor: Intel Core I7-4770S 3.10Ghz
ram: 8GB
Video Card: Intel HD Graphics 4600
sound_card: OnBoard
Hard_Drive_Capacity: 2TB
Monitor/Display Make & Model: Acer S222HQL
Corel programs: VideoStudio Ultimate 2019 64bit

Re: Vitascene V3 - Some filters are missing

Postby gewb » Sat Jun 15, 2019 10:34 pm

lata wrote:Thanks Gary
I suspect you are correct but strange that my VS 2018 library shows V2.0, yet using Vitascene shows 3.0.259
We do know however that installing 2019 has affected earlier versions in some way or another.
Most confusing and a little annoying

Like you I cannot find Tilt-Shift


Hi Trevor -

That is correct and is as programmed. Those are just labels in the application and not read from the Vitascene application. It could be labeled Mickey Mouse but launch Vitascene 3.
gewb
 
Posts: 254
Joined: Wed Dec 02, 2015 3:29 am
Location: Colorado, USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: MSI X470 Gaming Plus
processor: AMD Ryzen 7 2700X
ram: 16GB
Video Card: AMD R9-270
Hard_Drive_Capacity: 5TB
Monitor/Display Make & Model: LG 24MK430
Corel programs: X10.5 Ult., 2018 & 2019 Ult.

Re: Vitascene V3 - Some filters are missing

Postby gewb » Sat Jun 15, 2019 10:53 pm

Airone wrote:Hi all,

At this link (https://vimeo.com/23010488) there is a video tutorial that explains how to apply the Vitascene V2 tilt-shift filters (#620 #630 #631 #638) to a movie. In this case Vitascene is installed inside Adobe Premiere, but this should not be influential on the existence or not of a Vitascene filter. Furthermore, by watching the video, you can clearly see the list of filters existing in the Vitascene application and the tilt-shift filters are some of those that are missing in the version contained in VideoStudio Ultimate 2019.

The VS version is a light free addon. You could ask proDAD if the full package (or the proDAD Lite version) will work in VideoStudio. The full package is $599 USD and the LE version is $199 USD.

Here is a link: https://www.prodad.com/Video-Effects-Tr ... s.html#buy
gewb
 
Posts: 254
Joined: Wed Dec 02, 2015 3:29 am
Location: Colorado, USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: MSI X470 Gaming Plus
processor: AMD Ryzen 7 2700X
ram: 16GB
Video Card: AMD R9-270
Hard_Drive_Capacity: 5TB
Monitor/Display Make & Model: LG 24MK430
Corel programs: X10.5 Ult., 2018 & 2019 Ult.


Return to VideoStudio

Who is online

Users browsing this forum: No registered users and 24 guests