NEW! PaintShop Pro 2019

Split Screen Creator

Split Screen Creator

Postby pepegota » Fri Mar 22, 2019 6:46 pm

Split Screen Creator not working as before. The objects move and do not stay still. What is going on? How can I make them stay put as in 2018?














/
pepegota
 
Posts: 800
Joined: Thu Jun 11, 2009 5:49 pm
Location: USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUS Prime H370 - Plus
processor: Intel i7 - 8700
ram: 32 GB
Video Card: Nvidia GT 1030
sound_card: On board sound
Hard_Drive_Capacity: 2 TB
Monitor/Display Make & Model: Ben Q, "21" LCD
Corel programs: VS 2018

Re: Split Screen Creator

Postby canuck » Fri Mar 22, 2019 8:16 pm

pepegota wrote:Split Screen Creator not working as before. The objects move and do not stay still. What is going on? How can I make them stay put as in 2018?


/


What do you mean by "The objects move and do not stay still"?

Are you referring to a Pan&Zoom ?
canuck
 
Posts: 1808
Joined: Wed Mar 14, 2012 3:28 pm
Location: Deep River, Ontario, Canada
operating_system: Windows 8.1
System_Drive: C
32bit or 64bit: 64 Bit

Re: Split Screen Creator

Postby lata » Fri Mar 22, 2019 8:20 pm

Split Screen has been enhanced with 2019 and yes we can move a selection across the Split Screen
Don’t have 2019 installed at the moment but will provide screen shots if required, when i install
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 10855
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Split Screen Creator

Postby pepegota » Fri Mar 22, 2019 11:08 pm

I tried again and noticed in the lower left corner of the screen key frame use. I played around with it and now the objects do not move, which is what I wanted.
Still this is very mercurial and without knowledge of full control the movement could start again in the future.

Strange things are happening. I went into 2018 Split Screen and now it does not work. See screen in attachment. I do not get the full screen to work with, only that narrow
rectangle in the center with the 1 in it. I reinstalled and no change. I played around with the screen in 2018 and now it works. I hope it holds. Both are 2019 and 2018 are working as they should.
Attachments
SplitScreen.jpg
Note reduced area.
pepegota
 
Posts: 800
Joined: Thu Jun 11, 2009 5:49 pm
Location: USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUS Prime H370 - Plus
processor: Intel i7 - 8700
ram: 32 GB
Video Card: Nvidia GT 1030
sound_card: On board sound
Hard_Drive_Capacity: 2 TB
Monitor/Display Make & Model: Ben Q, "21" LCD
Corel programs: VS 2018

Re: Split Screen Creator

Postby lata » Sat Mar 23, 2019 5:52 pm

Your project properties appeared to be set to portrait instead of landscape
1080 x 1920 instead of 1920 x 1080
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 10855
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D


Return to VideoStudio

Who is online

Users browsing this forum: RobertOZ, WorstCases and 19 guests