NEW! Corel PaintShop Pro 2018

Corrupted files cannot be dropped.

Corrupted files cannot be dropped.

Postby mikeandm » Tue Feb 13, 2018 11:30 am

Hi,
I have recently installed Ultimate 2018 and so far all is working fine with one exception.
On several occasions if I select a clip on the timeline and try to move it to a different position I get a box with "Corrupted files cannot be dropped". The clip I am moving then goes back to its point of origin. If I try it again, doing nothing different it works fine.
I have done a search and found that some people were getting this problem with Triple Scoop music in X8 but no one posted a fix for it that I can find.
Any help appreciated as it is annoying.
Thanks
mikeandm
 
Posts: 18
Joined: Thu Jan 21, 2016 3:53 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Micro-Star International Co MS-1795
processor: Intel Core i7-6700HQ CPU
ram: 3936
Video Card: NVIDIA GeForce GTX 960M
sound_card: Realtek High definition
Hard_Drive_Capacity: 1233GB
Monitor/Display Make & Model: Generic PnP moniter
Corel programs: Videostudio 9.5

Re: Corrupted files cannot be dropped.

Postby tletter » Tue Feb 13, 2018 2:37 pm

mikeandm wrote:I get a box with "Corrupted files cannot be dropped".

I get this error message after running an analysis on a clip with Mercalli and then trying to drag and drop a new clip onto the timeline. Are you running Mercalli before the error message?

tletter
https://www.youtube.com/user/tletter
tletter
 
Posts: 218
Joined: Thu Jul 16, 2015 12:23 am
Location: Canada
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
processor: i7-3632QM 2.2 GHz
ram: 16GB
Hard_Drive_Capacity: 1TB
Corel programs: X4, X5, X6, X7, X8, X9, X10, 2018

Re: Corrupted files cannot be dropped.

Postby lata » Tue Feb 13, 2018 3:10 pm

Are you using Mask Creator on a clip on the top video track
If yes try applying Mask Creator to clips on the overlay track?

Strange that I was able to replicate the error, now trying again and things work ok?
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 9946
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Corrupted files cannot be dropped.

Postby mikeandm » Tue Feb 13, 2018 5:21 pm

Hi Trevor,
unfortunately I am not. Only re-arranging clips in a video.
Thanks
Mike
mikeandm
 
Posts: 18
Joined: Thu Jan 21, 2016 3:53 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Micro-Star International Co MS-1795
processor: Intel Core i7-6700HQ CPU
ram: 3936
Video Card: NVIDIA GeForce GTX 960M
sound_card: Realtek High definition
Hard_Drive_Capacity: 1233GB
Monitor/Display Make & Model: Generic PnP moniter
Corel programs: Videostudio 9.5

Re: Corrupted files cannot be dropped.

Postby lata » Wed Feb 14, 2018 4:40 pm

I managed to get the error message to show after applying the Mask Creator to the clip on the top track
A mask clip was automatically placed on the overlay track
I then tried dragging the top clip to the overlay track, showing as the white clip, I then got the error?

I was unable to replicate this problem, well not to order, I am sure it will appear again?

Corrupted file.jpg
click image for larger view
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 9946
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Corrupted files cannot be dropped.

Postby mikeandm » Fri Feb 16, 2018 4:45 am

Hi Trevor,
it seems that this is a recurring event for different people when doing different jobs.
I have so far only got it when trying to move a clip to an earlier section of the same video. Once the warning comes up the clip reverts to its original position. I can then reselect it and move it when it works perfectly. All is then well and I can move clips around for a while until once more it does the same.
So far I have not been able to find out any one thing that triggers it.
Thanks Mike
mikeandm
 
Posts: 18
Joined: Thu Jan 21, 2016 3:53 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Micro-Star International Co MS-1795
processor: Intel Core i7-6700HQ CPU
ram: 3936
Video Card: NVIDIA GeForce GTX 960M
sound_card: Realtek High definition
Hard_Drive_Capacity: 1233GB
Monitor/Display Make & Model: Generic PnP moniter
Corel programs: Videostudio 9.5

Re: Corrupted files cannot be dropped.

Postby lata » Fri Feb 16, 2018 10:33 am

Hi
I am having the same response as you although using Mask Creator
To be honest I have never seen this error before till I tested mask creator for another poster.
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 9946
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: Corrupted files cannot be dropped.

Postby wisdomwizard » Fri Mar 16, 2018 3:30 pm

I get the same error repeatedly doing nothing but adding files to the timeline or overlapping them for transitions. This never happened with any other previous versions of the program and there is nothing wrong with the clips. Once I hit OK I can then repeat the same thing again without an error message.
I hope Corel locates the issue and updates the program.

OH while I am at it. I save my project EVERY time before quitting the program but on the next startup I get asked every time "Do you want to recover the previous project file?" What's up with this glitch? Anybody else experiencing this? :?
wisdomwizard
 
Posts: 3
Joined: Wed Sep 13, 2017 9:29 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: HTS720
processor: Intel Core i7 6700HQ
ram: 8 gb
Video Card: Nvidia Geoforce GTX
Hard_Drive_Capacity: 1 TB
Monitor/Display Make & Model: AUO38ED
Corel programs: videostudio

Re: Corrupted files cannot be dropped.

Postby Phil » Tue Mar 20, 2018 3:54 pm

I'm getting the same message, " Corrupted files cannot be dropped". I was cutting some video into smaller segments, then if I try to drag a piece to the timeline below, the message comes up. No effects added at all. The work around is to copy and paste it or to drag it a second time. Never seen this before in all the VSP's I've had
Phil
 
Posts: 122
Joined: Tue Mar 22, 2011 3:51 pm
Location: London UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
processor: 8 Core AMD
ram: 32GB
Video Card: Radeon R9 4GB
Hard_Drive_Capacity: 500 SSD

Re: Corrupted files cannot be dropped.

Postby Phil » Fri Mar 23, 2018 12:01 pm

It can also happen at random when dragging an FX onto a clip. This is unusual. I was trying to drag the Sharpen FX to a clip and it happened repeatedly until I got it to accept it.
Phil
 
Posts: 122
Joined: Tue Mar 22, 2011 3:51 pm
Location: London UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
processor: 8 Core AMD
ram: 32GB
Video Card: Radeon R9 4GB
Hard_Drive_Capacity: 500 SSD


Return to VideoStudio

Who is online

Users browsing this forum: RobertOZ and 23 guests