Video Toolbox 1.5
Error: iKernel.exe
Error: Kernel32.dll
Installation: NEXT button is disabled
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:34 pm
Video Toolbox 2
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: NEXT button is disabled
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: NEXT button is disabled
Last edited by sjj1805 on Thu Jun 28, 2007 8:39 am, edited 1 time in total.
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:37 pm
VideoStudio 7
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: Compatibility of burned DVD
Burning: DVDR-INC-SPTI-5B-02-03-72-04
Burning: Power Calibration Error
Capturing: Capture from Hitachi DVDCAM using DVD RAM
Capturing: Country Codes
Capturing: DV transcode flush error
Capturing: firewire error "No common media type between these pins"
Capturing: How to have more Capture Properties like VideoStudio 6
Capturing: Jagged edges on the preview window when captured in DV format
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: General Access denied error 17111:1:5
Error: iKernel.exe
Error: Kernel32.dll
Error: Load Mpeg Vio Driver error when I launch VideoStudio 7
Error: Unable to load library
Error: Unable to render video MP42 decompressor not found
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: NEXT button is disabled
Installation: Upgrade does not install
Optimization: Cleaning temp files created by VideoStudio 7
Optimization: Suggestion for creating my slideshow as SVCD or DVD
Optimization: VideoStudio 7 System Requirements for CPU
Rendering: Codec Issue (AVI files)
Troubleshooting: Saving trimmed video doesn't work after patch installed
Troulbeshooting: Problem with DV Video Record Back to Camcorder
Troulbeshooting: VS7 crashes because of ATI Multimedia Center
Usage: Authoring VCD/SVCD/DVD at best quality possible
Usage: Auto Option of Insert Scenes as Chapters not available
Usage: How to Change Timeline Display Mode?
Usage: Preview Range Please provide a short description of the problem
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: Compatibility of burned DVD
Burning: DVDR-INC-SPTI-5B-02-03-72-04
Burning: Power Calibration Error
Capturing: Capture from Hitachi DVDCAM using DVD RAM
Capturing: Country Codes
Capturing: DV transcode flush error
Capturing: firewire error "No common media type between these pins"
Capturing: How to have more Capture Properties like VideoStudio 6
Capturing: Jagged edges on the preview window when captured in DV format
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: General Access denied error 17111:1:5
Error: iKernel.exe
Error: Kernel32.dll
Error: Load Mpeg Vio Driver error when I launch VideoStudio 7
Error: Unable to load library
Error: Unable to render video MP42 decompressor not found
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: NEXT button is disabled
Installation: Upgrade does not install
Optimization: Cleaning temp files created by VideoStudio 7
Optimization: Suggestion for creating my slideshow as SVCD or DVD
Optimization: VideoStudio 7 System Requirements for CPU
Rendering: Codec Issue (AVI files)
Troubleshooting: Saving trimmed video doesn't work after patch installed
Troulbeshooting: Problem with DV Video Record Back to Camcorder
Troulbeshooting: VS7 crashes because of ATI Multimedia Center
Usage: Authoring VCD/SVCD/DVD at best quality possible
Usage: Auto Option of Insert Scenes as Chapters not available
Usage: How to Change Timeline Display Mode?
Usage: Preview Range Please provide a short description of the problem
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:38 pm
VideoStudio 8
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: Compatibility of burned DVD
Burning: Power Calibration Error
Burning: Suggestions
Capturing: Firewire device not detected
Capturing: firewire error "No common media type between these pins"
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: Unable to load library
Info: [Charmap] Regional character set support
Info: Support for *.MOD or *.MOI files from JVC camcorders
Info: TV color safe area
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Rendering: Codec Issue (AVI files)
Rendering: Fix UVS 8 render video crash problem
Troubleshooting: Memory leak problems
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: Compatibility of burned DVD
Burning: Power Calibration Error
Burning: Suggestions
Capturing: Firewire device not detected
Capturing: firewire error "No common media type between these pins"
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: Unable to load library
Info: [Charmap] Regional character set support
Info: Support for *.MOD or *.MOI files from JVC camcorders
Info: TV color safe area
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Rendering: Codec Issue (AVI files)
Rendering: Fix UVS 8 render video crash problem
Troubleshooting: Memory leak problems
Last edited by sjj1805 on Thu Jun 28, 2007 8:41 am, edited 1 time in total.
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:38 pm
VideoStudio 9
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Audio: Windows Media Player has no audio for DVD playback after installing UVS 9
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: Compatibility of burned DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions
Burning: Why my VideoStudio doesn't allow burning my formatted DVDs?
Capturing: ADSTech capture devices
Capturing: Analog capture
Capturing: Firewire device not detected
Capturing: firewire error "No common media type between these pins"
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: iKernel.exe
Error: Kernel32.dll
Error: Memory could not be read
Error: Mfc42.dll
Error: Unable to load library
Info: [Charmap] Regional character set support
Info: Support for *.MOD or *.MOI files from JVC camcorders
Info: TV color safe area
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Patches: Update patch won't install. It doesn't find VS9 on my system.
Rendering: Codec Issue (AVI files)
Rendering: I see a "PICVIDEO" banner at the top of my rendered video clip
Troubleshooting: Chapters reset to default after saving
Troubleshooting: Memory leak problems
Troubleshooting: SmartSound compatibility with Quicktime 7
Usage: Adding Japanese texts
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Audio: Windows Media Player has no audio for DVD playback after installing UVS 9
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: Compatibility of burned DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions
Burning: Why my VideoStudio doesn't allow burning my formatted DVDs?
Capturing: ADSTech capture devices
Capturing: Analog capture
Capturing: Firewire device not detected
Capturing: firewire error "No common media type between these pins"
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: iKernel.exe
Error: Kernel32.dll
Error: Memory could not be read
Error: Mfc42.dll
Error: Unable to load library
Info: [Charmap] Regional character set support
Info: Support for *.MOD or *.MOI files from JVC camcorders
Info: TV color safe area
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Patches: Update patch won't install. It doesn't find VS9 on my system.
Rendering: Codec Issue (AVI files)
Rendering: I see a "PICVIDEO" banner at the top of my rendered video clip
Troubleshooting: Chapters reset to default after saving
Troubleshooting: Memory leak problems
Troubleshooting: SmartSound compatibility with Quicktime 7
Usage: Adding Japanese texts
Last edited by sjj1805 on Thu Jun 28, 2007 8:45 am, edited 1 time in total.
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:38 pm
VideoStudio 10
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: Compatibility of burned DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions
Capturing: Firewire device not detected
Capturing: firewire error "No common media type between these pins"
Capturing: HDV support
Capturing: MicroMV support
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: iKernel.exe
Error: Kernel32.dll
Error: Memory could not be read
Error: Mfc42.dll
Error: Unable to load library
Info: [Charmap] Regional character set support
Info: Accessing the Help File
Info: JVC MPEG2 support
Info: MPEG4 (MP4) support
Info: TV color safe area
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: Content Installer and Bonus Pack
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Installation: WinDVD 7 serial number
Rendering: Codec Issue (AVI files)
Troubleshooting: Memory leak problems
Usage: Creating "End Credits"
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: Compatibility of burned DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions
Capturing: Firewire device not detected
Capturing: firewire error "No common media type between these pins"
Capturing: HDV support
Capturing: MicroMV support
Error: Cannot initialize application. The screen resolution is too small to play the video. [15034:1:1]
Error: iKernel.exe
Error: Kernel32.dll
Error: Memory could not be read
Error: Mfc42.dll
Error: Unable to load library
Info: [Charmap] Regional character set support
Info: Accessing the Help File
Info: JVC MPEG2 support
Info: MPEG4 (MP4) support
Info: TV color safe area
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: Content Installer and Bonus Pack
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Installation: WinDVD 7 serial number
Rendering: Codec Issue (AVI files)
Troubleshooting: Memory leak problems
Usage: Creating "End Credits"
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:39 pm
CD & DVD Picture Show 2
Audio: How to make the slideshow match the music clip duration
Audio: What type of audio files can I use for the music background?
Burning: Authored miniDVD doesn't play on stand-alone DVD players
Burning: Burned VCD doesn't play on DVD Player
Burning: Power Calibration Error
Burning: 'SAO-2336-SPTI-2A-02-03-0C-00'
Error: iKernel.exe
Error: Kernel32.dll
Error: Load Mpeg Vio Driver error
Error: Mfc42.dll
Error: Please Insert disk 1 - layout.bin
Error: U32BASE.DLL is having a problem
Info: 16:9 or Widescreen support
Info: I can't add more than 36 photos per SlideShow
Installation: NEXT button is disabled
Optimization: VCD Slideshow quality decreases when adding transitions
Troubleshooting: I loose system sound after installing PictureShow 2
Troubleshooting: Slideshow flickers on TV playback
Troubleshooting: TV playback displays blurring or 'mosaic-like' pattern for slideshows
Usage: Adding one or more background music for slideshow
Usage: Adjusting image size to be consistent after adding pictures of different sizes
Usage: Can VCD project change format to DVD
Usage: Changing the working folder
Usage: Getting MPEG files from rendered PictureShow projects
Usage: Importing PhotoImpact Album files into PictureShow
Usage: Including the source picture files to the video discs
Usage: Is there a way that I can work on my project file on another machine?
Audio: How to make the slideshow match the music clip duration
Audio: What type of audio files can I use for the music background?
Burning: Authored miniDVD doesn't play on stand-alone DVD players
Burning: Burned VCD doesn't play on DVD Player
Burning: Power Calibration Error
Burning: 'SAO-2336-SPTI-2A-02-03-0C-00'
Error: iKernel.exe
Error: Kernel32.dll
Error: Load Mpeg Vio Driver error
Error: Mfc42.dll
Error: Please Insert disk 1 - layout.bin
Error: U32BASE.DLL is having a problem
Info: 16:9 or Widescreen support
Info: I can't add more than 36 photos per SlideShow
Installation: NEXT button is disabled
Optimization: VCD Slideshow quality decreases when adding transitions
Troubleshooting: I loose system sound after installing PictureShow 2
Troubleshooting: Slideshow flickers on TV playback
Troubleshooting: TV playback displays blurring or 'mosaic-like' pattern for slideshows
Usage: Adding one or more background music for slideshow
Usage: Adjusting image size to be consistent after adding pictures of different sizes
Usage: Can VCD project change format to DVD
Usage: Changing the working folder
Usage: Getting MPEG files from rendered PictureShow projects
Usage: Importing PhotoImpact Album files into PictureShow
Usage: Including the source picture files to the video discs
Usage: Is there a way that I can work on my project file on another machine?
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:39 pm
CD & DVD Picture Show 3
Burning: DVD not recognized by stand-alone player
Burning: Error Class ID: 3181b22a-9728-4087-ae5b-b601c19ead4c
Burning: No burner detected
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Troubleshooting: Using MOV files doesn't work with PictureShow
Burning: DVD not recognized by stand-alone player
Burning: Error Class ID: 3181b22a-9728-4087-ae5b-b601c19ead4c
Burning: No burner detected
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Troubleshooting: Using MOV files doesn't work with PictureShow
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:39 pm
CD & DVD Picture Show 4
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation
Installation: Clean reinstallation for crashing problems
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation
Installation: Clean reinstallation for crashing problems
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:40 pm
Gif Animator
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: [Charmap] Regional character set support
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: [Charmap] Regional character set support
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:40 pm
Ulead - All
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: "Run As" Admin for WinXP limmited account
Info: Macrovision protection
Installation: Can't Install
Installation: Cyclic Redundancy Check
Installation: Unable to install software using CD
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Defrag
Troubleshooting: Safe Mode
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: "Run As" Admin for WinXP limmited account
Info: Macrovision protection
Installation: Can't Install
Installation: Cyclic Redundancy Check
Installation: Unable to install software using CD
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Defrag
Troubleshooting: Safe Mode
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
41 posts
• Page 3 of 3 • 1, 2, 3
Return to Please Read This Before Posting & FAQ's
Who is online
Users browsing this forum: No registered users and 1 guest