Index
MovieFactoryPocket SlideshowCool 3D / 360Photo ExpressPhotoImpactDVD WorkshopMediaStudio ProPhoto ExplorerVideo ToolboxVideoStudioCD & DVD Picture ShowGIF AnimatorAll Ulead Products
Ulead Technical Support Knowledge Base
by sjj1805 on Mon May 07, 2007 8:21 pm
Last edited by sjj1805 on Tue May 08, 2007 12:44 am, edited 3 times in total.
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:22 pm
DVD MovieFactory 2
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: Power Calibration Error
Burning: The disc can't be detected by the burner (Disc not empty or full)
Burning: What is Disc-Direct/Direct to Disc?
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Error: iKernel.exe
Error: Kernel32.dll
Error: Some chapter entry frame numbers exceed the total frames
Info: Bad quality video results
Installation: NEXT button is disabled
Rendering: Codec Issue (AVI files)
Rendering: MPEG/MPEG2 source files
Troubleshooting: File is not accessible
Troubleshooting: Upside-Down video display
Usage: Can I import video from DVD discs?
Usage: File Size Estimate
Usage: Next button not available
Usage: When to use DVD-Video (fast editable) format
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: Power Calibration Error
Burning: The disc can't be detected by the burner (Disc not empty or full)
Burning: What is Disc-Direct/Direct to Disc?
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Error: iKernel.exe
Error: Kernel32.dll
Error: Some chapter entry frame numbers exceed the total frames
Info: Bad quality video results
Installation: NEXT button is disabled
Rendering: Codec Issue (AVI files)
Rendering: MPEG/MPEG2 source files
Troubleshooting: File is not accessible
Troubleshooting: Upside-Down video display
Usage: Can I import video from DVD discs?
Usage: File Size Estimate
Usage: Next button not available
Usage: When to use DVD-Video (fast editable) format
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:22 pm
DVD MovieFactory 3
Audio: AC-3 or Dolby Digital support
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Audio: No sound with video clip added for motion menu
Audio: Resulting DVD has no sound even if the source video clip does.
Audio: What audio formats are supported by MovieFactory 3?
Burning: 2 second gap for Audio CD
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: How to copy a DVD with only one DVD-burner drive (no DVD-Rom)
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions to minimize burning failure
Burning: The disc can't be detected by the burner (Disc not empty or full)
Burning: What is Disc-Direct/Direct to Disc?
Capturing: [ADSTech] Cannot load capture device
Capturing: [ADSTech] Can't edit MPEGs from Capwiz
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: MPEG error
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: MovieFactory slowed down
Optimization: Rendering speed
Patches: Crashes when update patch (Build 300P01) is installed
Patches: DL (dual layer) patches don't install on my MF3 SE
Rendering: Codec Issue (AVI files)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Troubleshooting: 1:Sound Sync
Troubleshooting: 2:Sound Sync
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Flicker problems
Troubleshooting: Importing DVD-RAM
Troubleshooting: Upside-Down video display
Usage: Add music to slideshow
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: Next button not available
Usage: Using the Join/Separate video functions
Audio: AC-3 or Dolby Digital support
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Audio: No sound with video clip added for motion menu
Audio: Resulting DVD has no sound even if the source video clip does.
Audio: What audio formats are supported by MovieFactory 3?
Burning: 2 second gap for Audio CD
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: How to copy a DVD with only one DVD-burner drive (no DVD-Rom)
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions to minimize burning failure
Burning: The disc can't be detected by the burner (Disc not empty or full)
Burning: What is Disc-Direct/Direct to Disc?
Capturing: [ADSTech] Cannot load capture device
Capturing: [ADSTech] Can't edit MPEGs from Capwiz
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: MPEG error
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: MovieFactory slowed down
Optimization: Rendering speed
Patches: Crashes when update patch (Build 300P01) is installed
Patches: DL (dual layer) patches don't install on my MF3 SE
Rendering: Codec Issue (AVI files)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Troubleshooting: 1:Sound Sync
Troubleshooting: 2:Sound Sync
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Flicker problems
Troubleshooting: Importing DVD-RAM
Troubleshooting: Upside-Down video display
Usage: Add music to slideshow
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: Next button not available
Usage: Using the Join/Separate video functions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:23 pm
DVD MovieFactory 4
Audio: Audio clip limit for Enhance Video : Audio tab
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Audio: No sound with video clip added for motion menu
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: Burner is busy with another program
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: The disc can't be detected by the burner (Disc not empty or full)
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: 1. Simple reinstallation - full version
Installation: 1. Simple reinstallation - SE or OEM
Installation: 2. Clean reinstallation - full version
Installation: 2. Clean reinstallation - SE or OEM
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Rendering speed
Rendering: Codec Issue (AVI files)
Rendering: Crashing problems (export)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Troubleshooting: 2:Sound Sync
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Importing DVD-RAM
Troubleshooting: Upside-Down video display
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: Merging several titles into a single file
Audio: Audio clip limit for Enhance Video : Audio tab
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Audio: No sound with video clip added for motion menu
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: Burner is busy with another program
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: The disc can't be detected by the burner (Disc not empty or full)
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: 1. Simple reinstallation - full version
Installation: 1. Simple reinstallation - SE or OEM
Installation: 2. Clean reinstallation - full version
Installation: 2. Clean reinstallation - SE or OEM
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Rendering speed
Rendering: Codec Issue (AVI files)
Rendering: Crashing problems (export)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Troubleshooting: 2:Sound Sync
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Importing DVD-RAM
Troubleshooting: Upside-Down video display
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: Merging several titles into a single file
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:23 pm
DVD MovieFactory 5
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: The disc can't be detected by the burner (Disc not empty or full)
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Cannot open MF 3 projects
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Info: VS10 projects in DMF5
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Rendering: Codec Issue (AVI files)
Rendering: Crashing problems (export)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Upside-Down video display
Usage: Can I make chapter menu for slideshows?
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: SmartScene Menu editing
Audio: Captured video has no sound
Audio: Captured video has no sound...2nd try
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: The disc can't be detected by the burner (Disc not empty or full)
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Cannot open MF 3 projects
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Info: VS10 projects in DMF5
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Rendering: Codec Issue (AVI files)
Rendering: Crashing problems (export)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Upside-Down video display
Usage: Can I make chapter menu for slideshows?
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: SmartScene Menu editing
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:24 pm
DVD MovieFactory 3.5
Audio: Captured video has no sound...2nd try
Audio: No sound with video clip added for motion menu
Burning: 2 second gap for Audio CD
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions to minimize burning failure
Burning: The disc can't be detected by the burner (Disc not empty or full)
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: Failed to reuse converted cache file
Error: iKernel.exe
Error: Join Video
Error: Kernel32.dll
Error: Mfc42.dll
Error: MPEG error
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Rendering speed
Patches: Where can I get updates for MF3.5?
Rendering: Codec Issue (AVI files)
Rendering: Crashing problems (export)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Suggestions to minimize burning failure
Troubleshooting: 1:Sound Sync
Troubleshooting: 2:Sound Sync
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Flicker problems
Troubleshooting: Importing DVD-RAM
Troubleshooting: Upside-Down video display
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: Using the Join/Separate video functions
Audio: Captured video has no sound...2nd try
Audio: No sound with video clip added for motion menu
Burning: 2 second gap for Audio CD
Burning: 4.7 GB vs. 4.38 GB DVD
Burning: DVD not recognized by stand-alone player
Burning: No burner detected
Burning: Power Calibration Error
Burning: Suggestions to minimize burning failure
Burning: The disc can't be detected by the burner (Disc not empty or full)
Capturing: DV Transcode Flush Error
Capturing: firewire error "No common media type between these pins"
Capturing: Firewire not detected
Error: Failed to reuse converted cache file
Error: iKernel.exe
Error: Join Video
Error: Kernel32.dll
Error: Mfc42.dll
Error: MPEG error
Error: Some chapter entry points exceed total entry points
Info: [Charmap] Regional character set support
Info: Bad quality video results
Info: Firewall warning popup when using MovieFactory
Info: Support for *.MOD or *.MOI files from JVC camcorders
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: NEXT button is disabled
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Rendering speed
Patches: Where can I get updates for MF3.5?
Rendering: Codec Issue (AVI files)
Rendering: Crashing problems (export)
Rendering: Jerky quality
Rendering: MPEG/MPEG2 source files
Suggestions to minimize burning failure
Troubleshooting: 1:Sound Sync
Troubleshooting: 2:Sound Sync
Troubleshooting: Direct to Disc
Troubleshooting: File is not accessible
Troubleshooting: Flicker problems
Troubleshooting: Importing DVD-RAM
Troubleshooting: Upside-Down video display
Usage: Continue to play next clip
Usage: File Size Estimate
Usage: Using the Join/Separate video functions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:24 pm
Pocket Slideshow
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Burning: Power Calibration Error
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:24 pm
Cool 360
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: User Manual
Installation: 1. Simple reinstall
Installation: 1. Simple reinstallation for crashing problems
Installation: 2. Clean reinstallation
Installation: 2. Clean reinstallation procedure if simple reinstall don't work
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Installation: Where can I find the serial number?
Optimization: How to capture great photos for creating panoramic images
Troubleshooting: Downloading pictures to the computer
Troubleshooting: The Cool 360 plug-in works with IE but not with Netscape
Troubleshooting: Why can't I view my panorama on htm pages in IE6?
Usage: Adjusting the Focal Length
Usage: How do I post my work to the Web?
Usage: How do I set a MIME map on my Web server?
Usage: How to add my camera lens to the camera lens list
Usage: How to view panoramic images
Usage: Is it possible to put links in my panoramic images?
Usage: Why do I need a plug-in viewer for my browsers?
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: User Manual
Installation: 1. Simple reinstall
Installation: 1. Simple reinstallation for crashing problems
Installation: 2. Clean reinstallation
Installation: 2. Clean reinstallation procedure if simple reinstall don't work
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Installation: Where can I find the serial number?
Optimization: How to capture great photos for creating panoramic images
Troubleshooting: Downloading pictures to the computer
Troubleshooting: The Cool 360 plug-in works with IE but not with Netscape
Troubleshooting: Why can't I view my panorama on htm pages in IE6?
Usage: Adjusting the Focal Length
Usage: How do I post my work to the Web?
Usage: How do I set a MIME map on my Web server?
Usage: How to add my camera lens to the camera lens list
Usage: How to view panoramic images
Usage: Is it possible to put links in my panoramic images?
Usage: Why do I need a plug-in viewer for my browsers?
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:25 pm
Cool 3D 3.x
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation for crashing problems
Installation: 2. Clean reinstallation for v3.5
Installation: 3. Compatibility Wizard
Installation: Got software from magazine (PC Advisor), but no serial number
Installation: NEXT button is disabled
Installation: Ulead COOL 3D 3.5 support for Windows NT 4
Installation: VISTA compatibility for old versions
Troubleshooting: Why can't I import some Adobe Illustrator files?
Usage: Can I add the Text Wave effect to objects?
Usage: Importing images as background for Cool 3D
Usage: Selecting different shapes from 'Insert Geometric Object'
Usage: What is the EnVector module?
Usage: What is the Wireframe button?
Usage: What is 'Use HAL Rendering' function'?
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation for crashing problems
Installation: 2. Clean reinstallation for v3.5
Installation: 3. Compatibility Wizard
Installation: Got software from magazine (PC Advisor), but no serial number
Installation: NEXT button is disabled
Installation: Ulead COOL 3D 3.5 support for Windows NT 4
Installation: VISTA compatibility for old versions
Troubleshooting: Why can't I import some Adobe Illustrator files?
Usage: Can I add the Text Wave effect to objects?
Usage: Importing images as background for Cool 3D
Usage: Selecting different shapes from 'Insert Geometric Object'
Usage: What is the EnVector module?
Usage: What is the Wireframe button?
Usage: What is 'Use HAL Rendering' function'?
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:25 pm
Cool 3D Production Studio 1.0
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation for crashing problems
Installation: 2. Clean reinstallation
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: Reinstallation procedure for crashing problems
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Preview quality deteriorates for large projects
Optimization: Why is the rendering speed so slow?
Troubleshooting: Errors using C3D project files in MeidaStudio Pro and VideoStudio
Troubleshooting: Installed new nVidea graphics but does not display properly
Troubleshooting: Particles look opaque
Troubleshooting: Why can't I execute COOL 3D Production Studio?
Usage: Can I export particles as 3DS or X models?
Usage: Can I use background/texture image of any size?
Usage: Deform objects with Freeform tool
Usage: Effects that can be used for 3D objects exported to 3DS and X
Usage: How can I apply some object effects on a grouped object?
Usage: How to define the rotation center for a grouped object
Usage: Using Cool 3D projects as overly for MediaStudio Pro
Usage: What is the Smart Relink dialogue box for?
Usage: What kind of object attributes I can adjust for a grouped object?
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Installation: 1. Simple reinstallation for crashing problems
Installation: 2. Clean reinstallation
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: Reinstallation procedure for crashing problems
Installation: Upgrade does not install
Installation: VISTA compatibility for old versions
Optimization: Preview quality deteriorates for large projects
Optimization: Why is the rendering speed so slow?
Troubleshooting: Errors using C3D project files in MeidaStudio Pro and VideoStudio
Troubleshooting: Installed new nVidea graphics but does not display properly
Troubleshooting: Particles look opaque
Troubleshooting: Why can't I execute COOL 3D Production Studio?
Usage: Can I export particles as 3DS or X models?
Usage: Can I use background/texture image of any size?
Usage: Deform objects with Freeform tool
Usage: Effects that can be used for 3D objects exported to 3DS and X
Usage: How can I apply some object effects on a grouped object?
Usage: How to define the rotation center for a grouped object
Usage: Using Cool 3D projects as overly for MediaStudio Pro
Usage: What is the Smart Relink dialogue box for?
Usage: What kind of object attributes I can adjust for a grouped object?
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:26 pm
Photo Express 4
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: Auto Detector
Info: Where can I get more templates and content?
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Troubleshooting: PE 4.0 no longer runs after upgraded from Win98 to WinXP
Usage: Batch Adjust - modifying multiple images at once
Usage: Print preview shows red lines, will this show on print-out?
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: Auto Detector
Info: Where can I get more templates and content?
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Troubleshooting: PE 4.0 no longer runs after upgraded from Win98 to WinXP
Usage: Batch Adjust - modifying multiple images at once
Usage: Print preview shows red lines, will this show on print-out?
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:26 pm
Photo Express 5
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: Auto Detector
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: Auto Detector
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:27 pm
Photo Express 6
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: Auto Detector
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Error: iKernel.exe
Error: Kernel32.dll
Error: Mfc42.dll
Info: Auto Detector
Installation: NEXT button is disabled
Installation: VISTA compatibility for old versions
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:27 pm
PhotoImpact 7
Error: iKernel.exe
Error: Kernel32.dll
Info: Cropped 4R printouts
Info: EPS file format support
Info: Increasing photo resolution
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Upgrading: Can I upgrade to SmartSaver Pro 3 from PhotoImpact 7 or later?
Usage: Disabling the SPLASH SCREEN
Usage: How to automatically open images in PhotoImpact (association)
Usage: How to use Adobe PhotoShop filters with PhotoImpact
Error: iKernel.exe
Error: Kernel32.dll
Info: Cropped 4R printouts
Info: EPS file format support
Info: Increasing photo resolution
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Upgrading: Can I upgrade to SmartSaver Pro 3 from PhotoImpact 7 or later?
Usage: Disabling the SPLASH SCREEN
Usage: How to automatically open images in PhotoImpact (association)
Usage: How to use Adobe PhotoShop filters with PhotoImpact
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
by sjj1805 on Mon May 07, 2007 8:27 pm
PhotoImpact 8
Error: iKernel.exe
Error: Kernel32.dll
Info: [Charmap] Regional character set support
Info: Auto Detector
Info: Cropped 4R printouts
Info: EPS file format support
Info: EXIF is missing
Info: Increasing photo resolution
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: Smart Download problem
Installation: Upgrade does not install
Optimization: When you get -Referenced Memory- error
Troubleshooting: Memory leak problems
Troubleshooting: Scanner not detected
Upgrading: Can I upgrade to SmartSaver Pro 3 from PhotoImpact 7 or later?
Usage: Brightness mismatch
Usage: Disabling the SPLASH SCREEN
Usage: How do I make a slideshow VCD disc and play it on TV?
Usage: How to automatically open images in PhotoImpact (association)
Usage: Setting Hyperlinks
Error: iKernel.exe
Error: Kernel32.dll
Info: [Charmap] Regional character set support
Info: Auto Detector
Info: Cropped 4R printouts
Info: EPS file format support
Info: EXIF is missing
Info: Increasing photo resolution
Installation: 1. Simple reinstallation
Installation: 2. Clean reinstallation
Installation: 3. Compatibility Wizard
Installation: NEXT button is disabled
Installation: Smart Download problem
Installation: Upgrade does not install
Optimization: When you get -Referenced Memory- error
Troubleshooting: Memory leak problems
Troubleshooting: Scanner not detected
Upgrading: Can I upgrade to SmartSaver Pro 3 from PhotoImpact 7 or later?
Usage: Brightness mismatch
Usage: Disabling the SPLASH SCREEN
Usage: How do I make a slideshow VCD disc and play it on TV?
Usage: How to automatically open images in PhotoImpact (association)
Usage: Setting Hyperlinks
Regards, Steve Jones, Web Board Administrator
-
sjj1805 - Posts: 15116
- Joined: Wed Jan 26, 2005 7:20 am
- Location: Birmingham UK
- operating_system: Windows XP Pro
- System_Drive: E
- 32bit or 64bit: 32 Bit
- motherboard: Equium P200-178
- processor: Intel Pentium Dual-Core Processor T2080
- ram: 2 GB
- Video Card: Intel 945 Express
- sound_card: Intel GMA 950
- Hard_Drive_Capacity: 1160 GB
41 posts
• Page 1 of 3 • 1, 2, 3
Return to Please Read This Before Posting & FAQ's
Who is online
Users browsing this forum: No registered users and 0 guests