NEW! Corel PaintShop Pro 2018

VSX2-VS9: How to create a split-screen effect

For VideoStudio, MediaStudio Pro, VideoGraphics Lab, Cool3D

Moderators: lata, Ken Berry

VSX2-VS9: How to create a split-screen effect

Postby rguthrie » Tue Nov 22, 2005 9:16 pm

How to create a split-screen effect in Corel's VideoStudio X2Pro to VideoStudio 9

DISCLAIMER: OK, this isn't really a disclaimer, but I originally wrote this for VS9 (as you'll notice in the screen shots). And since then the pictures disappeared from the web. So now I've uploaded them to a new location.

If you've ever wanted to try a split-screen effect, now you can with Corel's VideoStudio powerful filters and Mask & Chroma key!

Let's say that you've recorded two videos of yourself, one with you on the left side of the video and one with you on the right side of the video. You've already captured your videos and now you're ready to begin to put them into one video!

Step 1. Switch to Timeline View.

Step 2. Insert your "left" video to the Video Track.

Step 3. Insert your "right" video to the Overlay Track.

Step 4. Right-click your overlay video in the Preview Window and select Fit to Screen.

Step 5. Go to the Gallery and select Video Filter and drag-n-drop the Cropping filter onto your overlay track on the Timeline.

Image


Step 6. Select Customize Filter.

Step 6a. On the first key frame (it's the little red diamond on the left) make the Width 50% and the Height 100%. You'll notice in the Original screen that there are some dashed lines showing the amount that has been cropped. You'll also notice a cross-hair in the middle. Click on the cross-hair and move the selection to the right side. You'll now notice that the Preview screen is now 50% blacked out and the video only shows in the right half.

Image


Step 6b. Select Stationary. This will keep your selection to the right of the screen.

Step 6c. Click on the right diamond and repeat step 6a for the last keyframe.

Step 6d. Click the Fill color box and choose a color that's not in your picture, like hot pink. This will become your masking color. Now click OK.

Image

Step 7. Select Mask & Chroma key, then Apply overlay options.

Step 7a. Select the eyedropper tool and click on your hot pink overlay color. Voila! Now you'll see both of your videos!

Image


Now you can go back and adjust the size of your Cropping Filter to suit the needs for your video. Just remember to always do it for the first and last key frames.

ONE FINAL TIP: Your Overlay track may be a bit brighter, or darker, than the Video track. Use the Brightness filter to darken, or lighten, your Overlay track until the blend looks perfect. If you do this however, you'll need to reselect your Chroma Key with the eyedropper in the Overlay Options tab.

Have fun and let your imagination go!
Ronald Guthrie
Last edited by rguthrie on Sun Nov 01, 2009 11:08 pm, edited 3 times in total.
User avatar
rguthrie
 
Posts: 428
Joined: Wed Nov 16, 2005 1:56 pm
operating_system: Windows 7 Professional
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Pegatron IPMTB-TK
processor: Intel Core i7 930
ram: 9GB
Video Card: ATI Radeon HD 5450
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 1TB

Postby jdubya » Sun Nov 27, 2005 6:46 pm

Thanks for posting this tut.It is a neat trick I think everyone will want to use. :D
jdubya
 

Question about the "crop"

Postby gerlyn7 » Tue Feb 14, 2006 4:41 pm

Very interresting tutorial.
I am presently testing Video Studio after a free download.
But I can't find anywhere the transition effect you are using, nor any of those I can see on the picture of the "Video Filter" box you do show.
Can I be sure of getting those if I buy the product, or have you used something extra ? :?:
thank you .
gg
gerlyn7
 

Re: Question about the "crop"

Postby Ron P. » Tue Feb 14, 2006 11:28 pm

gerlyn7 wrote:Very interresting tutorial.
I am presently testing Video Studio after a free download.
But I can't find anywhere the transition effect you are using, nor any of those I can see on the picture of the "Video Filter" box you do show.
Can I be sure of getting those if I buy the product, or have you used something extra ? :?:
thank you .
gg


Did you download the Content Packs? Generally you use "Smart (not so) download, to get all the filters, effects, etc..

The links to these files can be found in this post:

http://forum.corel.com/EN/viewtopic.php?t=9857&highlight=smart+download

Regards..

Ron P.
Ron Petersen, Web Board Administrator
User avatar
Ron P.
Site Admin
 
Posts: 12195
Joined: Tue May 10, 2005 12:45 am
Location: Kansas, USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Hewlett-Packard 2AF3 1.0
processor: 3.40 gigahertz Intel Core i7-4770
ram: 16GB
Video Card: NVIDIA GeForce GTX 645
sound_card: NVIDIA High Definition Audio
Hard_Drive_Capacity: 4TB
Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter

Split screen

Postby allanforbes » Tue Mar 09, 2010 4:59 pm

Hi
I copied your technique for creating a split screen effect - but keep getting a thin black line - what is the best way to avoid this - I am using Videostudio x3?
allanforbes
 
Posts: 27
Joined: Tue Mar 09, 2010 4:05 pm
Location: West Midlands
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
processor: Intel Core i7cpu Q720 1.6GHz 6 MB L2 L3 Cache
ram: 4GB
Video Card: Nvidia Geforce Cuda GT330M
sound_card: Nvidia
Hard_Drive_Capacity: 500GB
Monitor/Display Make & Model: 41.6 cm (16.4") VAIO Display Premium HD1080

Postby sjj1805 » Tue Mar 09, 2010 8:03 pm

I have already replied in your other post. Please do not try and get two threads working for the same issue it causes confusion.
sjj1805
 
Posts: 14932
Joined: Wed Jan 26, 2005 7:20 am
Location: Birmingham UK
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Equium P200-178
processor: Intel Pentium Dual-Core Processor T2080
ram: 2 GB
Video Card: Intel 945 Express
sound_card: Intel GMA 950
Hard_Drive_Capacity: 1160 GB

Re: VSX2-VS9: How to create a split-screen effect

Postby kevsterman » Sun Apr 04, 2010 9:11 pm

I've followed the above tutorial to the letter but I'm not getting the desired effect. I have a clip of me standing on the left and a clip of me standing on the right. I place the left clip in the video track and the right clip in the overlay track. I applied the cropping effect to the overlay track, moved the selection so that half of the screen goes black, ticked fill colour and changed the colour to pink. Then I selected Mask & Chromakey and Overlay Options. Now this is where I can't follow the tutorial anymore. It says to select the eyedropper tool and click on the pink overlay colour, but there is no pink in view anymore to click on. The moment I tick Apply Overlay Options the pink colour in the preview window disappears and the clip of me standing on the right appears instead. This is almost what I want, trouble is, the clip of me on the right becomes slightly transparent, despite the transparency option set to 0. Its frustrating because I'm so close. What am I doing wrong? Oh I'm using VS Pro x3 trial.
kevsterman
 
Posts: 12
Joined: Wed Mar 31, 2010 5:11 pm
operating_system: Vista Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK Computer INC. P5K SE EPU Rev 1
processor: 2.85 gigahertz Intel Core2 Quad Q9550
ram: 8GB
Video Card: NVIDIA GeForce 9800 GX2
sound_card: dont know
Hard_Drive_Capacity: 900GB

Re: VSX2-VS9: How to create a split-screen effect

Postby Trevor Andrew » Mon Apr 05, 2010 12:06 pm

Hi Kevin

1 / Once you have selected ‘Apply overlay options’ the chroma key has automatically selected the colour pink. See the ‘Similarity’ colour. (clever) and removed this colour, the box to the right selects the amount of effect, removing more or less pink. Reducing this should alter your transparency, but may restore some pink.

2 / It’s a bit of trial and error in selecting the correct chrome colour, Green is normally used when setting up a shoot.

3 / Click the colour square to change it to black, now you will be in the pink, use the colour dropper to select.

Time to experiment and play about with the different options...........
Trevor Andrew
 


Return to VIDEO Product Tutorials

Who is online

Users browsing this forum: No registered users and 3 guests