I'm not sure if this is the right place to ask this, but here goes...
I want to connect the PC DVI output to my TV Component Input. The TV is about 10 Years old but it's an HDTV and (as I mentioned) it does have the Y, Pb, Pr connections. I've seen cables. Is there anything I need to set on the PC? Do I need a specific resolution output?
Any and all help is appreciated.
Mike
PC to TV Component connection
by Mike-Mat on Mon Jan 10, 2011 10:56 pm
Tips For Manufaturing
Mulltmedia Training For CadCam & CNC.
http://www.tipsformanufacturing.com
Camtasia Studio - VideoStudio X2 - DVDShrink
DVDDecripter - XPPro 64 - Intel Quad Core
ASUS P5Q3 Deluxe MoBo - Panasonic DVX100
Mulltmedia Training For CadCam & CNC.
http://www.tipsformanufacturing.com
Camtasia Studio - VideoStudio X2 - DVDShrink
DVDDecripter - XPPro 64 - Intel Quad Core
ASUS P5Q3 Deluxe MoBo - Panasonic DVX100
-
Mike-Mat - Posts: 80
- Joined: Fri Apr 28, 2006 5:47 pm
- Location: Arizona
- operating_system: Windows 7 Professional
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS P5Q3 Delux
- processor: Intel i7 970
- ram: 12GB
- Video Card: ATI 7600
- sound_card: M-Audio Audiophile 192
- Hard_Drive_Capacity: 1TB
Re: PC to TV Component connection
by Mike-Mat on Fri Jan 14, 2011 5:57 pm
If anyone is interested, I may have found a solution to output a Component video signal to my old(er) TV.
This only works with certain ATI Radion cards and outputs an Component HD signal.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT
This ATI Radion 9600, 256MG, It's 128 bit and has 2 DVI ports. I can have a monitor and still output to the TV.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT
Including a cable, all for under $50
Mike Mattera
This only works with certain ATI Radion cards and outputs an Component HD signal.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT
This ATI Radion 9600, 256MG, It's 128 bit and has 2 DVI ports. I can have a monitor and still output to the TV.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT
Including a cable, all for under $50
Mike Mattera
Tips For Manufaturing
Mulltmedia Training For CadCam & CNC.
http://www.tipsformanufacturing.com
Camtasia Studio - VideoStudio X2 - DVDShrink
DVDDecripter - XPPro 64 - Intel Quad Core
ASUS P5Q3 Deluxe MoBo - Panasonic DVX100
Mulltmedia Training For CadCam & CNC.
http://www.tipsformanufacturing.com
Camtasia Studio - VideoStudio X2 - DVDShrink
DVDDecripter - XPPro 64 - Intel Quad Core
ASUS P5Q3 Deluxe MoBo - Panasonic DVX100
-
Mike-Mat - Posts: 80
- Joined: Fri Apr 28, 2006 5:47 pm
- Location: Arizona
- operating_system: Windows 7 Professional
- System_Drive: C
- 32bit or 64bit: 64 Bit
- motherboard: ASUS P5Q3 Delux
- processor: Intel i7 970
- ram: 12GB
- Video Card: ATI 7600
- sound_card: M-Audio Audiophile 192
- Hard_Drive_Capacity: 1TB
Re: PC to TV Component connection
by spearss91 on Mon Feb 06, 2012 7:53 am
Go to here. I am Sharing with you How to connect PC to TV Component ... http://www.ramelectronics.net/howto-pc-tv.ep
I hope it might be helpful for you...
I hope it might be helpful for you...
Online movies free with ultimate video sources.
Online movies magazine for youth where you can get a knowledge about latest movies!!
Online movies magazine for youth where you can get a knowledge about latest movies!!
- spearss91
- Posts: 1
- Joined: Mon Feb 06, 2012 7:07 am
- Location: Canada
- operating_system: Windows 7 Professional
- System_Drive: K
- 32bit or 64bit: 32 Bit
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests