NEW! Corel PaintShop Pro 2018

Video Size

Moderators: lata, Ken Berry

Video Size

Postby antoniomch » Tue Dec 05, 2017 9:30 am

Hi

I managed to convert a 35y old VHS tape in VideoStudio X10, and I'm have an issue.
The image with less then 20% if it's real height, it's not trimmed, but flattened.
I tried different VHS and acquisition devices and and in all the problem persists.
This is tape is a copy I received many year ago from an original ( that it's lost ) in NTSC format. They made a copy to PAL system, the copy I have, but I do not know if it was done the wright way.
How to enlarge this to fit int it's original 4:3 format ?
antoniomch
 
Posts: 2
Joined: Tue Dec 05, 2017 8:31 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
Corel programs: Corel

Re: Video Size

Postby Ken Berry » Tue Dec 05, 2017 10:00 am

Antonio -- since you used Video Studio for the conversion, I have transferred your post to the Video Studio forum as you are more likely to receive answers here.
Ken Berry
User avatar
Ken Berry
Site Admin
 
Posts: 19605
Joined: Fri Dec 10, 2004 9:36 pm
Location: Levin, New Zealand
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Hewlett-Packard 2B0F
processor: Core i3-4130T 2.9 GHz
ram: 8 GB
Video Card: NVidia GeForce 710A
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 1 TB
Monitor/Display Make & Model: AOC 28" 1920 x 1080
Corel programs: VS X10; PSP 2018; MS3D; ASP 3

Re: Video Size

Postby BrianCee » Tue Dec 05, 2017 12:58 pm

Assuming that the whole image is there completely but just squashed top to bottom then try this

put the video in the top timeline and Double click on it

this will open the 'Options' panel which has two tabs - they are 'Video' and 'Attribute'

by default the panel always opens with the Video tab open - change to the Attribute tab

You will now see a small box next to the words 'Distort Clip' - click the little box so that a tick appears in it

you will now see that a number of little yellow square icons have appeared on your preview screen

hover the mouse cursor over the one at the centre of your image and the cursor changes to a double ended up/down arrow

press the left mouse key and hold down while you slide the mouse down - the edge of the video will move down - drag the block to the edge of the preview window

repeat for the top edge pushing up to the top edge of the preview window

save your project

hopefully that will cure the problem - let us know how you get on

...
My VideoStudio demo videos - https://www.youtube.com/user/MrBrianCee
BrianCee
 
Posts: 5372
Joined: Sat Jan 21, 2012 1:04 pm
Location: London England UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
ram: 8GB
Hard_Drive_Capacity: 4TB
Monitor/Display Make & Model: HP
Corel programs: VS X4,X5,X6,X7,X8, X9, X10

Re: Video Size

Postby antoniomch » Tue Dec 05, 2017 7:40 pm

Wonderful!!!
Resulted great
Thanks
antoniomch
 
Posts: 2
Joined: Tue Dec 05, 2017 8:31 am
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
Corel programs: Corel


Return to VideoStudio

Who is online

Users browsing this forum: No registered users and 24 guests