NEW! Corel PaintShop Pro 2018

User Settings In DMF7

Moderator: DVDDoug

User Settings In DMF7

Postby Coral » Sun Mar 31, 2013 9:55 am

Is there a way to keep the user settings in Corel Ulead DVD MovieFactory Pro 7.00.398 ?
The capture settings always defaults to 4:3 and have to set each time I run the application.
Coral
 
Posts: 168
Joined: Sun May 03, 2009 10:08 pm
Location: Malta EU
operating_system: Windows XP Pro
System_Drive: C
32bit or 64bit: 32 Bit
motherboard: Asus P8P67 Pro Rev. 3
processor: Intel Core i5 2400 Quad Core 3.1GHz Socket 1155
ram: 8 GB
Video Card: Gainward GT 520 1024 MB RAM
sound_card: On Board
Hard_Drive_Capacity: 500 GB X2
Monitor/Display Make & Model: AOC 19 inch CRT tube

Re: User Settings In DMF7

Postby lata » Wed Apr 17, 2013 6:04 pm

Hi Coral

Sorry for the delay in replying to your post.
I do not have Movie Factory installed so cannot check these details, but using Video Studio you were able to set the default aspect from the splash/startup screen.
If the start-up screen does not show we were able to activate via preferences (F6)
Then re-boot the program.

That’s assuming DVD MF is similar to Video Studio.
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 9646
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D

Re: User Settings In DMF7

Postby Ken Berry » Wed Apr 17, 2013 8:37 pm

Trevor -- unfortunately, MF 7 (Pro) acts differently to VS in this regard. There is no such setting under Preferences, nor any choice on the start-up screen (only the type of disc).

However, if you select Movie Template Manager for DVD under the first icon in the bottom left of screen (Settings and Options), then there are a number of options listed. First there are 4:3 settings (High, Good, Standard and Long Play). Then similar ones for 16:9. I select 16:9 High which uses a bitrate of 7000 kbps, though this is editable higher (or lower). If I then click out of Movie Template Manager with that selection still highlighted, then select the cogwheel 'Project Settings' icon (second from left), then the burning properties reflect the settings for 16:9 High which I have selected.

Moreover, when I close the program then reopen it for a new project, the 16:9 High remains the output format.
Ken Berry
User avatar
Ken Berry
Site Admin
 
Posts: 19703
Joined: Fri Dec 10, 2004 9:36 pm
Location: Levin, New Zealand
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Hewlett-Packard 2B0F
processor: Core i3-4130T 2.9 GHz
ram: 8 GB
Video Card: NVidia GeForce 710A
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 1 TB
Monitor/Display Make & Model: AOC 28" 1920 x 1080
Corel programs: VS X10; PSP 2018; MS3D; ASP 3

Re: User Settings In DMF7

Postby lata » Thu Apr 18, 2013 9:15 am

Hi

Thanks Ken for the update on DVD Movie Factory.
Having just upgraded to Windows7 I have not installed DVD MF so could not check.
I just don’t need the program other than for reference
I may however install XP over W7 to allow me to install older Corel versions?

Cheers
Regards Trevor
User avatar
lata
Site Admin
 
Posts: 9646
Joined: Thu Jan 19, 2012 6:21 am
Location: UK
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: ASUSTeK COMPUTER INC A88XM-A USB 3 1 Rev X.0x
processor: 4.10 gigahertz AMD A10-7890K Radeon R7
ram: 16 gb
Video Card: on board
sound_card: Realtek High Definition Audio
Hard_Drive_Capacity: 500 SSD
Monitor/Display Make & Model: LG W2242 [Monitor]
Corel programs: Video Studio, PSP, PI X3, MS3D


Return to DVD MovieFactory

Who is online

Users browsing this forum: No registered users and 5 guests