NEW! Corel PaintShop Pro 2018

MovieFactory 6 Update patch #2

Moderator: DVDDoug

Postby Ron P. » Sun Jan 25, 2009 11:08 am

trackfan wrote:I purchased a boxed version of DMF 6+ in October 2008 directly from Corel. I also noticed that two patches and a hot fix were all released in 2007 to improve the performance. Can anyone tell whether these items need to be installed for my version of DMF 6+, or have these items already been updated with later versions of DMF 6+, making these updates unnecessary?


Welcome to the forums,

First I doubt that Corel has updated the programs to include these fixes, so you might need to install them. I emphasize the might.

The Hotfix should only be installed if you have problems with AVControl SDK during installation. If you did not experience this problem then do not install the hotfix.

Update Patch 1
* Displaying incorrect aspect ratio when importing Panasonic AVCHD files.
* Error message pops up while converting video imported from AVCHD.

If you have those problems listed, then install it, if not, then do not...

Update Patch 2
* The issue with adding "Time" and "Date" info with DV-AVI video is resolved
* Enhanced performance when adding auto-subtitles to DVD+VR format content
* Enhanced performance when on-disc editing DVD-VR discs with CF detection
* The audio issue when exporting HD MOV files is resolved
* The AV sync issue when trimming DivX video is resolved
* The issue of failing to connect Sony PC-1000 DV USB drive after invoking capture DB is resolved
* Enhance .MOV file preview performance
* The issue of converting .MOV file to DVD is resolved
* The issue of saving the changes on the thumbnails of chapter menus is resolved
* An option for ¡§Create HD DVD on DVD disc¡¨ (3XDVD) is added under the drop down list

If you experience any of the above problems, install, otherwise I would not worry about installing it.

Basically if it ain't broke, don't fix it...;)
Ron Petersen, Web Board Administrator
User avatar
Ron P.
Site Admin
 
Posts: 12196
Joined: Tue May 10, 2005 12:45 am
Location: Kansas, USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Hewlett-Packard 2AF3 1.0
processor: 3.40 gigahertz Intel Core i7-4770
ram: 16GB
Video Card: NVIDIA GeForce GTX 645
sound_card: NVIDIA High Definition Audio
Hard_Drive_Capacity: 4TB
Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter

Postby trackfan » Sun Jan 25, 2009 5:30 pm

Thanks Vidoman.
trackfan
 
Posts: 2
Joined: Sat Jan 24, 2009 6:12 pm
Location: Baton Rouge

Postby maxblack » Mon Jan 26, 2009 3:13 am

vidoman wrote:
trackfan wrote:I purchased a boxed version of DMF 6+ in October 2008 directly from Corel. I also noticed that two patches and a hot fix were all released in 2007 to improve the performance. Can anyone tell whether these items need to be installed for my version of DMF 6+, or have these items already been updated with later versions of DMF 6+, making these updates unnecessary?
...I doubt that Corel has updated the programs to include these fixes, so you might need to install them. I emphasize the might....Basically if it ain't broke, don't fix it...;)

This is a really good question from trackfan, and it should be embarrassing to Corel that it is so hard for an end-user to find an answer! The "patches" should indicate within their README files what revision level they should be applied to, and what revision they bring the program to!

I too bought MF6+ in 2008, and my version number is 6.10.0194.6. I'm fairly certain that this is the absolute latest/greatest. What are others' versions here?
maxblack
 
Posts: 20
Joined: Sun Jan 25, 2009 6:31 pm

Postby Ron P. » Mon Jan 26, 2009 3:40 am

My version obtained just after released, is 6.10.0194.3, I do not have the HD pack, so that may be the difference in the 3 or 4 at the end. I agree Max, that Corel should have that information available. Most other software companies provide it somewhere, either in a text file with the program, or at least on their web site.
Last edited by Ron P. on Wed Feb 11, 2009 9:47 pm, edited 1 time in total.
Ron Petersen, Web Board Administrator
User avatar
Ron P.
Site Admin
 
Posts: 12196
Joined: Tue May 10, 2005 12:45 am
Location: Kansas, USA
operating_system: Windows 10
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: Hewlett-Packard 2AF3 1.0
processor: 3.40 gigahertz Intel Core i7-4770
ram: 16GB
Video Card: NVIDIA GeForce GTX 645
sound_card: NVIDIA High Definition Audio
Hard_Drive_Capacity: 4TB
Monitor/Display Make & Model: 1-HP 27" IPS, 1-Sanyo 21" TV/Monitor
Corel programs: VS5,8.9,10-X5,PSP9-X8,CDGS-9,X4,Painter

Postby maxblack » Wed Feb 11, 2009 9:35 pm

vidoman wrote:My version obtained just after released, is 6.10.0194.3, I do not have the HD pack...
Guess I must indeed have the latest then--yes I do have the HD pack also.

Let's hope some day Corel makes it easier to ID software updates needed--I spent an awful lot of time surfing on this one...
maxblack
 
Posts: 20
Joined: Sun Jan 25, 2009 6:31 pm

latest patch or update on MF6?

Postby pierrenev » Sun Mar 01, 2009 5:32 pm

When I use thumbnail menu for Chapters, my Preview freezes and I can't even burn my project.
I if use Text menus, instead, everything works fine.
This problem semed to be resolved, before.
I have patch 2 installed. Is it supposed to fix that problem?
Is there any newer patch?
Thanks in advance.
Pierre.
pierrenev
 
Posts: 69
Joined: Thu Aug 16, 2007 5:40 pm
Location: canada
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: AMD phenom II X6
processor: p7 - 6 core
ram: 8GB
Video Card: AMD Radeon HD 6450 512MB dedicated
sound_card: Sound Max Integrated Digital Audio
Hard_Drive_Capacity: 3300 GO
Monitor/Display Make & Model: HP 2509b LCD

Previous

Return to DVD MovieFactory

Who is online

Users browsing this forum: No registered users and 8 guests